System
:
Linux server53.web-hosting.com 4.18.0-553.54.1.lve.el8.x86_64 #1 SMP Wed Jun 4 13:01:13 UTC 2025 x86_64
Software
:
LiteSpeed
Server
:
198.54.126.113
Domains
:
Cant read /etc/named.conf
Permission
:
[
dr-xr-xr-x
]
:
/
bin
/
216.73.216.49
Select
Submit
Home
Add User
Mailer
About
DBName
DBUser
DBPass
DBHost
WpUser
WpPass
Input e-mail
ACUPOFTEA for baroun-eg.com made by tabagkayu.
Folder Name
File Name
File Content
File
mytop
#!/usr/bin/perl # # $Id: mytop,v 1.99-maria8 2025/07/16 17:59:26 jweisbuch Exp $ =pod =head1 NAME mytop - display MariaDB/MySQL server performance info like `top' =cut ## most of the POD is at the bottom of the file use 5.005; use strict; use warnings; use DBI; use Getopt::Long; use Socket; use List::Util qw(min max); use File::Basename; $main::VERSION = "1.99-maria8"; my $path_for_script = dirname($0); $| = 1; $0 = 'mytop'; my $WIN = ($^O eq 'MSWin32') ? 1 : 0; ## Test for color support. eval { require Term::ANSIColor; }; my $HAS_COLOR = $@ ? 0 : 1; $HAS_COLOR = 0 if $WIN; ## Test of Time::HiRes support eval { require Time::HiRes }; my $HAS_TIME = $@ ? 0 : 1; my $debug = 0; ## Try to lower our priority (which, who, pri) setpriority(0,0,10) unless $WIN; ## Prototypes sub Clear(); sub GetData(); sub GetQPS(); sub FullQueryInfo($); sub Explain($); sub PrintTable(@); sub PrintHelp(); sub Sum(@); sub commify($); sub make_short($); sub Hashes($); sub Execute($); sub StringOrRegex($); sub GetInnoDBStatus(); sub GetCmdSummary(); sub GetShowVariables(); sub GetShowStatus(); sub cmd_s; sub cmd_S; sub cmd_q; ## Default Config Values my %config = ( batchmode => 0, color => 1, db => '', database => '', delay => 5, filter_user => qr/.?/, filter_db => qr/.?/, filter_host => qr/.?/, filter_state => qr/.?/, header => 1, help => 0, host => 'localhost', idle => 1, long => 120, long_nums => 0, mode => 'top', prompt => 0, pass => '', password => '', port => 3306, resolve => 0, slow => 10, ## slow query time socket => '', sort => 1, ## default or reverse sort ("s") user => 'root', fullqueries => 0, ## shows untruncated queries usercol_width => 8, ## User column width dbcol_width => 9, ## DB column width hide_progress => 0 ## hide the "%" column when available ); my %qcache = (); ## The query cache--used for full query info support. my %ucache = (); ## The user cache--used for full killing by user my %dbcache = (); ## The db cache. This should be merged at some point. my %statcache = (); ## The show status cache for GetShowStatus() my (%STATUS, %OLD_STATUS); # header stuff. my $CLEAR = $WIN ? '': `clear`; ## Term::ReadKey values my $RM_RESET = 0; my $RM_NOBLKRD = 3; ## using 4 traps Ctrl-C :-( ## Add options from .my.cnf first my $my_print_defaults; if (!defined($my_print_defaults=my_which("my_print_defaults"))) { print "Warning: Can't find my_print_defaults. Please add it to your PATH!\n"; exit(1); } unshift @ARGV, split "\n", `$my_print_defaults client mytop`; ## Read the user's config file, if it exists. my $config = "$ENV{HOME}/.mytop"; if (-e $config) { if (open CFG, "<$config") { while (<CFG>) { next if /^\s*($|#)/; ## skip blanks and comments chomp; if (/(\S+)\s*=\s*(.*\S)/) { my ($k, $v) = ($1, $2); if ($k =~ /^filter_/i) { $config{lc $k} = StringOrRegex($v) if exists $config{lc $k}; } else { $config{lc $k} = $v if exists $config{lc $k}; } } } close CFG; } ## map database/password onto db/pass ## short version gets precedence for historical reasons $config{'db'} = $config{'database'} unless $config{'db'}; $config{'pass'} = $config{'password'} unless $config{'pass'}; } ## Command-line args. use vars qw($opt_foo); Getopt::Long::Configure('no_ignore_case', 'bundling'); GetOptions( "color!" => \$config{color}, "user|u=s" => \$config{user}, "pass|password|p=s" => \$config{pass}, "database|db|d=s" => \$config{db}, "host|h=s" => \$config{host}, "port|P=i" => \$config{port}, "socket|S=s" => \$config{socket}, "delay|s=i" => \$config{delay}, "batch|batchmode|b" => \$config{batchmode}, "header!" => \$config{header}, "idle|i!" => \$config{idle}, "resolve|r!" => \$config{resolve}, "prompt!" => \$config{prompt}, "long=i" => \$config{long}, "long_nums!" => \$config{long_nums}, "mode|m=s" => \$config{mode}, "slow=i" => \$config{slow}, "sort=s" => \$config{sort}, "fullqueries|L!" => \$config{fullqueries}, "usercol_width=i" => \$config{usercol_width}, "dbcol_width=i" => \$config{dbcol_width}, "hide_progress|a!" => \$config{hide_progress} ); ## User may have put the port with the host. if ($config{host} =~ s/:(\d+)$//) { $config{port} = $1; } ## Don't use Term::ReadKey unless running interactively. if (not $config{batchmode}) { require Term::ReadKey; Term::ReadKey->import(); } ## User may want to disable color. if ($HAS_COLOR and not $config{color}) { $HAS_COLOR = 0; } if ($HAS_COLOR) { import Term::ANSIColor ':constants'; } else { *RESET = sub { }; *YELLOW = sub { }; *RED = sub { }; *MAGENTA = sub { }; *GREEN = sub { }; *BLUE = sub { }; *WHITE = sub { }; *BOLD = sub { }; } my $RESET = RESET() || ''; my $YELLOW = YELLOW() || ''; my $RED = RED() || ''; my $MAGENTA = MAGENTA() || ''; my $GREEN = GREEN() || ''; my $BLUE = BLUE() || ''; my $WHITE = WHITE() || ''; my $BOLD = BOLD() || ''; ## Connect my $dsn; ## Socket takes precedence. my $prefix= 'mysql'; if (eval {DBI->install_driver("MariaDB")}) { $dsn = "DBI:MariaDB:database=$config{db};mariadb_read_default_group=mytop;"; $prefix= 'mariadb' } else { $dsn = "DBI:mysql:database=$config{db};mysql_read_default_group=mytop;"; } if ($config{socket} and -S $config{socket}) { $dsn .= "${prefix}_socket=$config{socket}"; } elsif($config{host} eq "localhost") { $dsn .= "host=$config{host}"; } else { $dsn .= "host=$config{host};port=$config{port}"; } if ($config{prompt}) { print "Password: "; ReadMode(2); chomp($config{pass} = <STDIN>); ReadMode(0); print "\n"; } my $dbh = DBI->connect($dsn, $config{user}, $config{pass}, { PrintError => 0 }); if (not ref $dbh) { my $Error = <<EODIE Cannot connect to MariaDB/MySQL server. Please check the: * database you specified "$config{db}" (default is "") * username you specified "$config{user}" (default is "root") * password you specified "$config{pass}" (default is "") * hostname you specified "$config{host}" (default is "localhost") * port you specified "$config{port}" (default is 3306) * socket you specified "$config{socket}" (default is "") The options my be specified on the command-line or in a ~/.mytop or ~/.my.cnf config file. See the manual (perldoc mytop) for details. Here's the exact error from DBI. It might help you debug: $DBI::errstr EODIE ; die $Error; } ReadMode($RM_RESET) unless $config{batchmode}; ## Get static data my $db_version; my $db_release; my $server = "MySQL"; my $have_query_cache; my @variables = Hashes("SHOW VARIABLES"); foreach (@variables) { if ($_->{Variable_name} eq "version") { $db_version = $_->{Value}; $db_version =~ /^(\d+)/; $db_release = $1; $server = "MariaDB" if ($db_version =~ /maria/i); # Get the version number only $db_version = $1 if($db_version =~ m/(.*?)-/); next; } if ($_->{Variable_name} eq "have_query_cache") { if ($_->{Value} ne 'NO') { $have_query_cache = 1; } else { $have_query_cache = 0; } next; } } my ($has_is_processlist, $has_time_ms, $has_progress); $has_is_processlist = $has_time_ms = $has_progress = 0; ## Check if the server has the INFORMATION_SCHEMA.PROCESSLIST table ## for backward compatibility $has_is_processlist = Execute("SELECT /*mytop*/ 1 FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = 'information_schema' AND TABLE_NAME = 'PROCESSLIST';")->rows; if ($has_is_processlist == 1) { ## Check if the server has the TIME_MS column on the I_S.PROCESSLIST table ## If it is the case, it will fetch the query time with decimal precision ## for queries that has been running for less than 10k seconds $has_time_ms = Execute("SELECT /*mytop*/ 1 FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA = 'information_schema' AND TABLE_NAME = 'PROCESSLIST' AND COLUMN_NAME = 'TIME_MS';")->rows; if ($has_time_ms == 1) { ## Check if the server has the STAGE column on the I_S.PROCESSLIST ## table (MariaDB) to retreive query completion information $has_progress = Execute("SELECT /*mytop*/ 1 FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_SCHEMA = 'information_schema' AND TABLE_NAME = 'PROCESSLIST' AND COLUMN_NAME = 'STAGE';")->rows; } } ######################################################################### ## ## The main loop ## ######################################################################### ReadMode($RM_NOBLKRD) unless $config{batchmode}; while (1) { my $key; if ($config{mode} eq 'qps') { GetQPS(); $key = ReadKey(1); next unless $key; if ($key =~ /t/i) { $config{mode} = 'top'; } if ($key =~ /q/) { cmd_q(); } next; } if ($config{mode} eq 'top') { GetData(); last if $config{batchmode}; $key = ReadKey($config{delay}); next unless $key; } elsif ($config{mode} eq 'cmd') { GetCmdSummary(); last if $config{batchmode}; $key = ReadKey($config{delay}); next unless $key; } elsif ($config{mode} eq 'innodb') { GetInnoDBStatus(); last if $config{batchmode}; print "InnoDB Status [hit t to exit this mode or q to exit the application]\n"; $key = ReadKey($config{delay}); next unless $key; } elsif ($config{mode} eq 'status') { GetShowStatus(); last if $config{batchmode}; $key = ReadKey($config{delay}); next unless $key; } ## ## keystroke command processing (if we get this far) ## if ($key eq '!') { Execute("STOP /*mytop*/ SLAVE;"); Execute("SET /*mytop*/ GLOBAL sql_slave_skip_counter=1"); Execute("START /*mytop*/ SLAVE"); } # t - top if ($key =~ /t/i) { $config{mode} = 'top'; } ## q - quit if ($key eq 'q') { cmd_q(); } if ($key eq 'D') { require Data::Dumper; print Data::Dumper::Dumper([\%config]); ReadKey(0); } ## l - change long running hightling if ($key eq 'l') { cmd_l(); next; } ## m - mode switch to qps if ($key eq 'm') { $config{mode} = 'qps'; Clear() unless $config{batchmode}; print "Queries Per Second [hit t to exit this mode or q to exit the application]\n"; next; } ## c - mode switch to command summary if ($key eq 'c') { $config{mode} = 'cmd'; Clear() unless $config{batchmode}; print "Command Summary\n"; next; } ## C - change Color on and off if ($key eq 'C') { if ($HAS_COLOR) { $HAS_COLOR = 0; } else { $HAS_COLOR = 1; } } ## s - seconds of delay if ($key eq 's') { cmd_s(); next; } if ($key eq 'S') { cmd_S(); next; } ## R - resolve hostnames if ($key eq 'R') { if ($config{resolve}) { $config{resolve} = 0; } else { $config{resolve} = 1; } } ## t - username based filter if ($key eq 't') { ReadMode($RM_RESET); print RED(), "Which state (blank for all, /.../ for regex): ", RESET(); $config{filter_state} = StringOrRegex(ReadLine(0)); ReadMode($RM_NOBLKRD); next; } ## u - username based filter if ($key eq 'u') { ReadMode($RM_RESET); print RED(), "Which user (blank for all, /.../ for regex): ", RESET(); $config{filter_user} = StringOrRegex(ReadLine(0)); ReadMode($RM_NOBLKRD); next; } ## d - database name based filter if ($key eq 'd') { ReadMode($RM_RESET); print RED(), "Which database (blank for all, /.../ for regex): ", RESET(); $config{filter_db} = StringOrRegex(ReadLine(0)); ReadMode($RM_NOBLKRD); next; } ## h - hostname based filter if ($key eq 'h') { ReadMode($RM_RESET); print RED(), "Which hostname (blank for all, /.../ for regex): ", RESET(); $config{filter_host} = StringOrRegex(ReadLine(0)); ReadMode($RM_NOBLKRD); next; } ## E - Show full Replication Error if ($key eq 'E') { my ($data) = Hashes('SHOW /*mytop*/ SLAVE STATUS'); Clear(); print "Error is: $data->{Last_Error}\n"; print RED(), "-- paused. press any key to resume --", RESET(); ReadKey(0); next; } ## F - remove all filters if ($key eq 'F') { $config{filter_host} = qr/.?/; $config{filter_db} = qr/.?/; $config{filter_user} = qr/.?/; $config{filter_state} = qr/.?/; print RED(), "-- display unfiltered --", RESET(); sleep 1; next; } ## p - pause if ($key eq 'p') { print RED(), "-- paused. press any key to resume --", RESET(); ReadKey(0); next; } ## i - idle toggle if ($key =~ /i/) { if ($config{idle}) { $config{idle} = 0; $config{sort} = 1; print RED(), "-- idle (sleeping) processed filtered --", RESET(); sleep 1; } else { $config{idle} = 1; $config{sort} = 0; print RED(), "-- idle (sleeping) processed unfiltered --", RESET(); sleep 1; } } ## I - InnoDB status if ($key =~ 'I') { $config{mode} = 'innodb'; Clear() unless $config{batchmode}; print "InnoDB Status\n"; next; } ## o - sort order if ($key =~ /o/) { if ($config{sort}) { $config{sort} = 0; print RED(), "-- sort order reversed --", RESET(); sleep 1; } else { $config{sort} = 1; print RED(), "-- sort order reversed --", RESET(); sleep 1; } } ## ? - help if ($key eq '?') { Clear(); PrintHelp(); ReadKey(0); next; } ## k - kill if ($key eq 'k') { ReadMode($RM_RESET); print RED(), "Thread id to kill: ", RESET(); my $id = ReadLine(0); $id =~ s/\s//g; if ($id =~ /^\d+$/) { Execute("KILL /*mytop*/ $id"); } else { print RED(), "-- invalid thread id --", RESET(); sleep 1; } ReadMode($RM_NOBLKRD); next; } ## K - kill based on a username if ($key =~ /K/) { ReadMode($RM_RESET); print RED(), "User to kill: ", RESET(); my $user = ReadLine(0); $user =~ s/\s//g; if ($user =~ /^\S+$/) { for my $pid (keys %ucache) { next unless $ucache{$pid} eq $user; Execute("KILL /*mytop*/ $pid"); select(undef, undef, undef, 0.2); } } else { print RED(), "-- invalid thread id --", RESET(); sleep 1; } ReadMode($RM_NOBLKRD); } ## f - full info if ($key =~ /f/) { ReadMode($RM_RESET); print RED(), "Full query for which thread id: ", RESET(); my $id = ReadLine(0); chomp $id; FullQueryInfo($id); ReadMode($RM_NOBLKRD); print RED(), "-- paused. press any key to resume or (e) to explain --", RESET(); my $key = ReadKey(0); if ($key eq 'e') { Explain($id); print RED(), "-- paused. press any key to resume --", RESET(); ReadKey(0); } next; } ## e - explain if ($key =~ /e/) { ReadMode($RM_RESET); print RED(), "Explain which query (id): ", RESET(); my $id = ReadLine(0); chomp $id; Explain($id); ReadMode($RM_NOBLKRD); print RED(), "-- paused. press any key to resume --", RESET(); ReadKey(0); next; } ## r - reset status counters if ($key =~ /r/) { Execute("FLUSH /*mytop*/ STATUS"); print RED(), "-- counters reset --", RESET(); sleep 1; next; } ## H - header toggle if ($key eq 'H') { if ($config{header}) { $config{header} = 0; } else { $config{header}++; } } ## # - magic debug key if ($key eq '#') { $debug = 1; } if ($key eq 'V') { GetShowVariables(); print RED(), "-- paused. press any key to resume --", RESET(); ReadKey(0); } ## M - switch to SHOW STATUS mode if ($key eq 'M') { $config{mode} = 'status'; } ## L - full queries toggle if ($key eq 'L') { if ($config{fullqueries}) { $config{fullqueries} = 0; print RED(), "-- full queries OFF --", RESET(); sleep 1; } else { $config{fullqueries} = 1; print RED(), "-- full queries ON --", RESET(); sleep 1; } } ## w - change columns width for the "User" and "Database" columns if ($key eq 'w') { ReadMode($RM_RESET); print RED(), "Width for the 'User' column (the actual value is ". $config{usercol_width}."): "; my $readWidth = ReadLine(0); chomp($readWidth); if (defined($readWidth) && $readWidth ne "") { if ($readWidth > 4 && $readWidth < 60) { $config{usercol_width} = $readWidth; } else { print RED(), "-- Invalid value ($readWidth), the previous value". "has been kept, press a key to resume --"; ReadKey(0); } } print RESET(), RED(), "Width for the 'DB' column (the actual value is ". $config{dbcol_width}."): ", RESET(); $readWidth = ReadLine(0); chomp($readWidth); if (defined($readWidth) && $readWidth ne "") { if ($readWidth > 2 && $readWidth < 60) { $config{dbcol_width} = $readWidth } else { print RED(), "-- Invalid value ($readWidth), the previous value". "has been kept, press a key to resume --", RESET(); ReadKey(0); } } undef $readWidth; ReadMode($RM_NOBLKRD); next; } ## a - progress column toggle (the column is only displayed ## if progress information are available from the processlist) if ($key eq 'a') { if ($config{hide_progress}) { $config{hide_progress} = 0; print RED(), "-- progress display ON --", RESET(); sleep 1; } else { $config{hide_progress} = 1; print RED(), "-- progress display OFF --", RESET(); sleep 1; } } } ReadMode($RM_RESET) unless $config{batchmode}; exit; ####################################################################### sub Clear() { if (not $WIN) { print "$CLEAR" } else { print "\n" x 90; ## dumb hack for now. Anyone know how to ## clear the screen in dos window on a Win32 ## system?? } } my $last_time; sub GetData() { ## Get terminal info my $now_time; %qcache = (); ## recycle memory %dbcache = (); my ($width, $height, $wpx, $hpx, $lines_left); if (not $config{batchmode}) { ($width, $height, $wpx, $hpx) = GetTerminalSize(); $lines_left = $height - 2; } else { $height = 999_999; ## I hope you don't have more than that! $lines_left = 999_999; $width = 80; } ## ## Header stuff. ## if ($config{header}) { my @recs = ""; if ($db_release > 4) { @recs = Hashes("SHOW /*mytop*/ GLOBAL STATUS"); } else { @recs = Hashes("SHOW /*mytop*/ STATUS"); } ## if the server died or we lost connectivity if (not @recs) { ReadMode($RM_RESET); exit 1; } ## get high-res or low-res time my ($t_delta); if ($HAS_TIME) { $now_time = Time::HiRes::gettimeofday(); } else { $now_time = time; } if ($last_time and $last_time != $now_time) { $t_delta = $now_time - $last_time; } %OLD_STATUS = %STATUS; # Set some status that may not exist in all versions $STATUS{Handler_tmp_write} = 0; $STATUS{Handler_tmp_update} = 0; $STATUS{Rows_tmp_read} = 0; foreach my $ref (@recs) { my $key = $ref->{Variable_name}; my $val = $ref->{Value}; $STATUS{$key} = $val; } ## Compute Key Cache Hit Stats $STATUS{Key_read_requests} ||= 1; ## can't divide by zero next my $cache_hits_percent = (100-($STATUS{Key_reads}/$STATUS{Key_read_requests}) * 100); $cache_hits_percent = sprintf("%2.2f",$cache_hits_percent); ## Query Cache info for <= Ver. 4.1 ## ## mysql> show status like 'qcache%'; ## +-------------------------+----------+ ## | Variable_name | Value | ## +-------------------------+----------+ ## | Qcache_queries_in_cache | 81 | ## | Qcache_inserts | 4961668 | ## | Qcache_hits | 1374170 | ## | Qcache_not_cached | 5656249 | ## | Qcache_free_memory | 33164800 | ## | Qcache_free_blocks | 2 | ## | Qcache_total_blocks | 168 | ## +-------------------------+----------+ ## ## Query Cache info for => Ver. 5.0 ## ## mysql> show status like 'qcache%'; ## +-------------------------+------------+ ## | Variable_name | Value | ## +-------------------------+------------+ ## | Qcache_free_blocks | 37652 | ## | Qcache_free_memory | 110289712 | ## | Qcache_hits | 1460617356 | ## | Qcache_inserts | 390563495 | ## | Qcache_lowmem_prunes | 6414172 | ## | Qcache_not_cached | 93002420 | ## | Qcache_queries_in_cache | 66558 | ## | Qcache_total_blocks | 192031 | ## +-------------------------+------------+ my $query_cache_hits = 0; my $query_cache_hits_per_sec = 0; my $now_query_cache_hits_per_sec = 0; if ($have_query_cache) { $query_cache_hits = $STATUS{Qcache_hits}; $query_cache_hits_per_sec = $STATUS{Qcache_hits} / $STATUS{Uptime}; if (defined $last_time and $last_time != $now_time) { my $q_delta = $STATUS{Qcache_hits} - $OLD_STATUS{Qcache_hits}; $now_query_cache_hits_per_sec = sprintf "%.2f", $q_delta / $t_delta; } } my $l; if (-e "/proc/loadavg") { ## To avoid warnings if the OS is not Linux open (my $fh, "<", "/proc/loadavg"); ## Only the first 3 values are interresting $l = join(" ", (split /\s+/, <$fh>)[0..2]); close $fh; } $last_time = $now_time; ## Server Uptime in meaningful terms... my $time = $STATUS{Uptime}; my ($d,$h,$m,$s) = (0, 0, 0, 0); $d += int($time / (60*60*24)); $time -= $d * (60*60*24); $h += int($time / (60*60)); $time -= $h * (60*60); $m += int($time / (60)); $time -= $m * (60); $s += int($time); my $uptime = sprintf("%d+%02d:%02d:%02d", $d, $h, $m, $s); ## Queries per second... my $avg_queries_per_sec = sprintf("%.2f", $STATUS{Questions} / $STATUS{Uptime}); my $num_queries = $STATUS{Questions}; my @t = localtime(time); my $current_time = sprintf "[%02d:%02d:%02d]", $t[2], $t[1], $t[0]; my $host_width = length("$server $db_version on $config{host}"); my $up_width = $width - $host_width - 1; Clear() unless $config{batchmode}; print RESET(); printf "%-.${host_width}s %${up_width}s\n", "$server $db_version on $config{host}", defined($l) ? "load ($l) up $uptime $current_time" : "up $uptime $current_time"; $lines_left--; printf " Queries: %-7s qps: %4.0f Slow: %7s Se/In/Up/De(%%): %02.0f/%02.0f/%02.0f/%02.0f\n", make_short( $STATUS{Questions} ), # q total $STATUS{Questions} / $STATUS{Uptime}, # qps, average make_short( $STATUS{Slow_queries} ), # slow # hmm. a Qcache hit is really a select and should be counted. 100 * ($STATUS{Com_select} + ($STATUS{Qcache_hits}||0) ) / $STATUS{Questions}, 100 * ($STATUS{Com_insert} + $STATUS{Com_replace} ) / $STATUS{Questions}, 100 * ($STATUS{Com_update} ) / $STATUS{Questions}, 100 * $STATUS{Com_delete} / $STATUS{Questions}; $lines_left--; if ($t_delta) { my $q_diff = ( $STATUS{Questions} - $OLD_STATUS{Questions} ); # print("q_diff: $STATUS{Questions} - $OLD_STATUS{Questions} / $t_delta = $q_diff\n"); printf(" Sorts: %6.0f qps now: %4.0f Slow qps: %3.1f Threads: %4.0f (%4.0f/%4.0f) %02.0f/%02.0f/%02.0f/%02.0f\n", ( $STATUS{Sort_rows} - $OLD_STATUS{Sort_rows} ) / $t_delta, ( $STATUS{Questions} - $OLD_STATUS{Questions} ) / $t_delta, ( # slow now (qps) ($STATUS{Slow_queries} ) ? ( $STATUS{Slow_queries} - $OLD_STATUS{Slow_queries} ) / $t_delta : 0 ), $STATUS{Threads_connected}, $STATUS{Threads_running}, $STATUS{Threads_cached}, (100 * ($STATUS{Com_select} - $OLD_STATUS{Com_select} + ($STATUS{Qcache_hits}||0) - ($OLD_STATUS{Qcache_hits}||0) ) ) / ($q_diff ), (100 * ($STATUS{Com_insert} - $OLD_STATUS{Com_insert} + $STATUS{Com_replace} - $OLD_STATUS{Com_replace} ) ) / ($q_diff ), (100 * ($STATUS{Com_update} - $OLD_STATUS{Com_update}) ) / ($q_diff ), (100 * ($STATUS{Com_delete} - $OLD_STATUS{Com_delete}) ) / ($q_diff ), ); } else { print "\n"; } $lines_left--; if ($have_query_cache and $STATUS{Com_select} and $query_cache_hits) { printf(" Cache Hits: %-5s Hits/s: %4.1f Hits now: %5.1f Ratio: ", make_short($STATUS{Qcache_hits}), # cache hits $STATUS{Qcache_hits} / $STATUS{Uptime}, # hits / sec ($t_delta) ? ($STATUS{Qcache_hits} - $OLD_STATUS{Qcache_hits}) / $t_delta : 0, # Hits Now ); my ($Ratio) = 100 * ($STATUS{Qcache_hits}) / ($STATUS{Qcache_hits} + $STATUS{Com_select} ); if ($HAS_COLOR) { print YELLOW() if ($Ratio < 80.0); print RED() if ($Ratio < 50.0); print MAGENTA() if ($Ratio < 20.0); } printf("%4.1f%% ",$Ratio); if ($HAS_COLOR) { print RESET(); } print " Ratio now: "; my ($Ratio_now) = ($t_delta) ? # ratio now 100 * ($STATUS{Qcache_hits} - $OLD_STATUS{Qcache_hits} ) / ( ($STATUS{Com_select} + $STATUS{Qcache_hits} - ($OLD_STATUS{Qcache_hits} + $OLD_STATUS{Com_select}) ) || 1) : 0; if ($HAS_COLOR) { print GREEN() if ($Ratio_now >= 80.0); print YELLOW() if ($Ratio_now < 80.0); print RED() if ($Ratio_now < 50.0); print MAGENTA() if ($Ratio_now < 20.0); } printf("%4.1f%% \n",$Ratio_now); if ($HAS_COLOR) { print RESET(); } $lines_left--; } if ($t_delta) { my $rows_read; if (defined($STATUS{Rows_read})) { $rows_read= $STATUS{Rows_read} - $OLD_STATUS{Rows_read}; } else { $rows_read= ($STATUS{Handler_read_first} + $STATUS{Handler_read_key} + $STATUS{Handler_read_next} + $STATUS{Handler_read_prev} + $STATUS{Handler_read_rnd} + $STATUS{Handler_read_rnd_next} - $OLD_STATUS{Handler_read_first} - $OLD_STATUS{Handler_read_key} - $OLD_STATUS{Handler_read_next} - $OLD_STATUS{Handler_read_prev} - $OLD_STATUS{Handler_read_rnd} - $OLD_STATUS{Handler_read_rnd_next}); } printf(" Handler: (R/W/U/D) %5d/%5d/%5d/%5d Tmp: R/W/U: %5d/%5d/%5d\n", $rows_read/$t_delta, ($STATUS{Handler_write} - $OLD_STATUS{Handler_write}) / $t_delta, ($STATUS{Handler_update} - $OLD_STATUS{Handler_update}) / $t_delta, ($STATUS{Handler_delete} - $OLD_STATUS{Handler_delete}) / $t_delta, ($STATUS{Rows_tmp_read} - $OLD_STATUS{Rows_tmp_read}) / $t_delta, ($STATUS{Handler_tmp_write} -$OLD_STATUS{Handler_tmp_write})/$t_delta, ($STATUS{Handler_tmp_update} - $OLD_STATUS{Handler_tmp_update})/$t_delta); } else { print "\n"; } $lines_left--; printf(" MyISAM Key Cache Efficiency: %2.1f%% Bps in/out: %5s/%5s ", $cache_hits_percent, make_short($STATUS{Bytes_received} / $STATUS{Uptime} ), make_short($STATUS{Bytes_sent} / $STATUS{Uptime})); printf("Now in/out: %5s/%5s", make_short(($STATUS{Bytes_received} - $OLD_STATUS{Bytes_received}) / $t_delta ), make_short(($STATUS{Bytes_sent} - $OLD_STATUS{Bytes_sent}) / $t_delta )) if ($t_delta); print "\n"; $lines_left--; my ($data) = Hashes('SHOW /*mytop*/ GLOBAL VARIABLES LIKE "read_only"'); if ($data->{Value} ne "OFF") { print RED() if ($HAS_COLOR) ; print " ReadOnly"; RESET() if ($HAS_COLOR); } ($data) = Hashes('SHOW /*mytop*/ SLAVE STATUS'); if (defined($data->{Master_Host})) { if (defined($data->{Seconds_Behind_Master})) { if ($HAS_COLOR) { print GREEN(); print YELLOW() if ($data->{Seconds_Behind_Master} > 60); print MAGENTA() if ($data->{Seconds_Behind_Master} > 360); } } print " Replication "; print "IO:$data->{Slave_IO_Running} "; print "SQL:$data->{Slave_SQL_Running} "; print RESET() if ($HAS_COLOR); if (defined($data->{Seconds_Behind_Master})) { if ($HAS_COLOR) { print GREEN(); print YELLOW() if ($data->{Seconds_Behind_Master} > 60); print MAGENTA() if ($data->{Seconds_Behind_Master} > 360); } print "Delay: $data->{Seconds_Behind_Master} sec."; } else { my $free = $width - 45; my $Err = substr $data->{Last_Error},0 ,$free; printf(" ERR: %-${free}s", $Err) if ($Err ne ""); } print WHITE() if ($HAS_COLOR); print "\n"; $lines_left--; } print "\n"; } if (not $config{batchmode} and not $config{header}) { Clear(); print RESET(); } ## ## Threads ## my $proc_cmd; ## Query used to fetch the processlist my $time_format = "6d"; if ($has_is_processlist == 1) { if ($has_time_ms == 1) { $time_format = "6.6s"; if ($has_progress == 1) { ## To have a computed value of "Progress" like the ## "SHOW PROCESSLIST" one, the Progress column of the query ## must be replaced by : ## "CASE WHEN Max_Stage < 2 THEN Progress ELSE ## (Stage-1)/Max_Stage*100+Progress/Max_Stage END AS Progress" $proc_cmd = "SELECT /*mytop*/ Id, User, Host, db, Command, CASE WHEN TIME > 10000 THEN Time ELSE ROUND(TIME_MS/1000, 1) END AS Time, State, Info, Progress, Stage, Max_Stage FROM INFORMATION_SCHEMA.PROCESSLIST WHERE ID != CONNECTION_ID();"; } else { $proc_cmd = "SELECT /*mytop*/ Id, User, Host, db, Command, CASE WHEN TIME > 10000 THEN Time ELSE ROUND(TIME_MS/1000, 1) END AS Time, State, Info FROM INFORMATION_SCHEMA.PROCESSLIST WHERE ID != CONNECTION_ID();"; } } else { $proc_cmd = "SELECT /*mytop*/ Id, User, Host, db, Command, Time, State, Info FROM INFORMATION_SCHEMA.PROCESSLIST WHERE ID != CONNECTION_ID();"; } } else { $proc_cmd = "SHOW /*mytop*/ FULL PROCESSLIST;"; } ## Minimal width values for columns with a dynamic width if ($config{usercol_width} < 4) { $config{usercol_width} = 4; } if ($config{dbcol_width} < 2) { $config{dbcol_width} = 2; } my @sz = (9, $config{usercol_width}, 15, $config{dbcol_width}, 6, 6, 8); if ($has_progress == 1 && !$config{hide_progress}) { push @sz, 5; }; my $used = scalar(@sz) + Sum(@sz); undef(@sz); ## If the terminal width <= 80, the state column will have a width of 6 ## chars else it will be between 6 and 15 depending on the terminal width my $state = $width <= 80 ? 6 : int(min(6+($width-80)/3, 15)); ## $free = The number of chars between the beginning of the "Query" ## column and the end of the line my $free = $width - $used - ($state - 6); my $format= "%9s %$config{usercol_width}s %15s %$config{dbcol_width}s %6s "; if ($has_progress == 1 && !$config{hide_progress}) { $format .= "%5s "; } $format .= "%6s %${state}s %-.${free}s\n"; my $format2 = "%9d %$config{usercol_width}.$config{usercol_width}s %15.15s %$config{dbcol_width}.$config{dbcol_width}s %${time_format} "; if ($has_progress == 1 && !$config{hide_progress}) { $format2 .= "%5.1f "; } $format2 .= "%6.6s %${state}.${state}s "; if ($config{fullqueries}) { $format2 .= "%-${free}s\n"; } else { $format2 .= "%-${free}.${free}s\n"; } print BOLD() if ($HAS_COLOR); if ($has_progress == 1 && !$config{hide_progress}) { printf $format, 'Id','User','Host/IP','DB','Time', '%', 'Cmd', 'State', 'Query'; } else { printf $format, 'Id','User','Host/IP','DB','Time', 'Cmd', 'State', 'Query'; } print RESET() if ($HAS_COLOR); ## Id User Host DB if ($has_progress == 1 && !$config{hide_progress}) { printf $format, '--','----','-------','--','----', '-', '---', '-----', '----------'; } else { printf $format, '--','----','-------','--','----', '---', '-----', '----------'; } $lines_left -= 2; my @data = Hashes($proc_cmd); foreach my $thread (@data) { last if not $lines_left; ## Drop Domain Name, unless it looks like an IP address. If ## it's an IP, we'll strip the port number because it's rarely ## interesting. my $is_ip = 0; if ($thread->{Host} =~ /^(\d{1,3}\.){3}(\d{1,3})(:\d+)?$/) { $thread->{Host} =~ s/:.*$//; $is_ip = 1; } else { $thread->{Host} =~ s/^([^.]+).*/$1/; } ## Otherwise, look up the IP (if resolve is set) and strip the ## name if ($is_ip and $config{resolve}) { $thread->{Host} =~ s/:\d+$//; my $host = gethostbyaddr(inet_aton($thread->{Host}), AF_INET); if ($host) { ## Only the hostname part of the DNS is kept $host =~ s/^([^.]+).*/$1/; } $thread->{Host} = $host; } ## Fix possible undefs $thread->{db} ||= ''; $thread->{Info} ||= ''; $thread->{Time} ||= 0 ; $thread->{Id} ||= 0 ; $thread->{User} ||= ''; $thread->{Command} ||= ''; $thread->{Host} ||= ''; $thread->{State} ||= ""; $thread->{Progress} ||= 0; ## Alter double hyphen comments so they don't break ## the query when newlines are removed - http://freshmeat.net/users/jerjones $thread->{Info} =~ s~\s--(.*)$~ /* $1 */ ~mg; ## Normalize spaces -- mostly disabled for now. This can ## break EXPLAIN if you try to explain a mangled query. It ## may be re-enabled later as an option. ## Replace newlines and carriage returns with a space $thread->{Info} =~ tr/\n\r/ /; ## Leading space removal $thread->{Info} =~ s/^\s*//; ## Strip non printing control symbols $thread->{Info} =~ tr/[[:cntrl:]]//; ## Collpase whitespace $thread->{Info} =~ s/\s+/ /g; ## Trailing space removal $thread->{Info} =~ s/\s$//; ## Put the first letter of the query uppercase for a better readability ## with long State strings $thread->{Info} = ucfirst $thread->{Info}; ## Stow it in the cache $qcache{$thread->{Id}} = $thread->{Info}; $dbcache{$thread->{Id}} = $thread->{db}; $ucache{$thread->{Id}} = $thread->{User}; ## If Progress information is available and a multi-stage query is ## running, the actual stage and the total number of stages of the ## thread are shown at the beginning of the State column if ($has_progress == 1 && $thread->{Max_Stage} && $thread->{Max_Stage} > 1) { $thread->{State} = $thread->{Stage}."/". $thread->{Max_Stage}." ".$thread->{State}; } } ## Sort by idle time (closest thing to CPU usage I can think of). my @sorted; if (not $config{sort}) { @sorted = sort { $a->{Time} <=> $b->{Time} } @data } else { @sorted = sort { $b->{Time} <=> $a->{Time} } @data } foreach my $thread (@sorted) { ## Check to see if we can skip out. ## We skip out if we know the given line doesn't match. next if (($thread->{Command} eq "Sleep") and (not $config{idle})); next if (($thread->{Command} eq "Binlog Dump") and (not $config{idle})); next if (($thread->{Command} eq "Daemon") and (not $config{idle})); next if ($thread->{User} !~ $config{filter_user}); next if ($thread->{db} !~ $config{filter_db}); next if ($thread->{Host} !~ $config{filter_host}); next if ($thread->{State} !~ $config{filter_state}); ## Otherwise, print. my $smInfo; if ($thread->{Info}) { if ($config{fullqueries}) { $smInfo = $thread->{Info}; if (length($smInfo) > $free) { $lines_left -= int((length($smInfo) - $free)/$width) + 1; } } else { $smInfo = substr $thread->{Info}, 0, $free; } } # if ($thread->{State}) # { # $smInfo = substr $thread->{State}, 0, $free; # } else { $smInfo = ""; } $lines_left--; if ($lines_left < 0) { print WHITE(), "-- Truncated query list -- "; last; } if ($HAS_COLOR) { print YELLOW() if $thread->{Command} eq 'Query'; print WHITE() if $thread->{Command} eq 'Sleep'; print GREEN() if $thread->{Command} eq 'Connect'; print BOLD() if $thread->{Time} > $config{slow}; print MAGENTA() if $thread->{Time} > $config{long}; } if ($has_progress == 1 && !$config{hide_progress}) { printf $format2, $thread->{Id}, $thread->{User}, $thread->{Host}, $thread->{db}, $thread->{Time}, $thread->{Progress}, $thread->{Command}, $thread->{State}, $smInfo; } else { printf $format2, $thread->{Id}, $thread->{User}, $thread->{Host}, $thread->{db}, $thread->{Time}, $thread->{Command}, $thread->{State}, $smInfo; } print RESET() if $HAS_COLOR; } } ########################################################################### my $questions; sub GetQPS() { my ($data) = Hashes('SHOW /*mytop*/ STATUS LIKE "Questions"'); my $num = $data->{Value}; if (not defined $questions) ## first time? { $questions = $num; return; } my $qps = $num - $questions; $questions = $num; print "$qps\n"; } ########################################################################### sub GetInnoDBStatus() { if (not $config{pager}) { if (not $config{pager} = my_which('less')) { $config{pager} = my_which('more'); } } my @data = Hashes("SHOW /*mytop*/ ENGINE INNODB STATUS"); open P, "|$config{pager}" or die "$!"; print keys %{$data[0]}; print $data[0]->{Status},"\n"; close P; } ########################################################################### my %prev_data; sub GetCmdSummary() { my ($width, $height, $wpx, $hpx, $lines_left); if (not $config{batchmode}) { ($width, $height, $wpx, $hpx) = GetTerminalSize(); $lines_left = $height - 2; } else { $height = 999_999; ## I hope you don't have more than that! $lines_left = 999_999; $width = 80; } ## Variable_name and Value pairs come back... my @data = Hashes("SHOW /*mytop*/ STATUS LIKE 'Com\\_%'"); my %cmd_data; my %cmd_delta; my %cmd_pct; my %cmd_delta_pct; my $total; my $delta_total; for my $item (@data) { next unless $item->{Value}; $item->{Variable_name} =~ s/^Com_//; $item->{Variable_name} =~ s/_/ /g; $cmd_data{$item->{Variable_name}} = $item->{Value}; $total += $item->{Value}; } ## Populate other stats for my $item (keys %cmd_data) { $cmd_delta{$item} = $cmd_data{$item} - ($prev_data{$item} || $cmd_data{$item} - 1); $delta_total += $cmd_delta{$item}; $cmd_pct{$item} = int(($cmd_data{$item} / $total) * 100); } for my $item (keys %cmd_data) { $cmd_delta_pct{$item} = int(($cmd_delta{$item} / $delta_total) * 100); } ## Display Clear() unless $config{batchmode}; print RESET(); printf "%18s %10s %4s | %5s %4s\n", 'Command', 'Total', 'Pct', 'Last', 'Pct'; printf "%18s %10s %4s | %5s %4s\n", '-------', '-----', '---', '----', '---'; $lines_left -= 2; for my $item (sort { $cmd_data{$b} <=> $cmd_data{$a} } keys %cmd_data) { printf "%18s %10d %4s | %5d %4s\n", $item, $cmd_data{$item}, $cmd_pct{$item} . "%", $cmd_delta{$item}, $cmd_delta_pct{$item} . "%"; last if not $lines_left; $lines_left -= 1; } %prev_data = %cmd_data; } ########################################################################### sub GetShowVariables() { if (not $config{pager}) { if (not $config{pager} = my_which('less')) { $config{pager} = my_which('more'); } } my @rows = Hashes("SHOW /*mytop*/ VARIABLES"); open P, "|$config{pager}" or die "$!"; for my $row (@rows) { my $name = $row->{Variable_name}; my $value = $row->{Value}; printf P "%32s: %s\n", $name, $value; } close P; } ########################################################################### sub GetShowStatus() { Clear() unless $config{batchmode}; my @rows = Hashes("SHOW /*mytop*/ STATUS"); printf "%32s %10s %10s Toggle idle with 'i'\n", 'Counter', 'Total', 'Change'; printf "%32s %10s %10s\n", '-------', '-----', '------'; for my $row (@rows) { my $name = $row->{Variable_name}; my $value = $row->{Value}; my $old = $statcache{$name}; my $delta = 0; next if $name =~ m/^Com_/; ## skip Com_ stats next if $value =~ m/^[^0-9]*$/; ## skip non-numeric ## TODO: if Qcache is off, we should skip Qcache_ values if ($HAS_COLOR and defined $old and $old =~ /^\d/) { if ($value > $old) { print YELLOW(); $delta = $value - $old; } elsif ($value < $old) { print RED(); $delta = $value - $old; } if (not $config{idle} and $value == $old) { ## filter unchanging stats, maybe print RESET(); next; } } printf "%32s: %10s %10s\n", $name, $value, $delta; print RESET() if $HAS_COLOR; $statcache{$name} = $value; } } ########################################################################### sub FullQueryInfo($) { my $id = shift; if (not exists $qcache{$id} or not defined $qcache{$id}) { print "*** Invalid id. ***\n"; return; } my $sql = $qcache{$id}; print $CLEAR; print "Thread $id was executing following query:\n\n"; print YELLOW(), $sql,"\n\n", RESET(); } ########################################################################### sub Explain($) { my $id = shift; if (not exists $qcache{$id} or not defined $qcache{$id}) { print "*** Invalid id. ***\n"; return; } my $sql = $qcache{$id}; my $db = $dbcache{$id}; Execute("USE /*mytop*/ $db"); my @info = Hashes("EXPLAIN $sql"); print $CLEAR; print "EXPLAIN $sql:\n\n"; PrintTable(@info); } ########################################################################### sub PrintTable(@) { my $cnt = 1; my @cols = qw(table type possible_keys key key_len ref rows Extra); for my $row (@_) { print "*** row $cnt ***\n"; for my $key (@cols) { my $val = $row->{$key} || 'NULL'; printf "%15s: %s\n", $key, $val; } $cnt++; } } ########################################################################### sub StringOrRegex($) { my $input = shift; chomp $input; if (defined $input) { ## regex, strip /.../ and use via qr// if ($input =~ m{^/} and $input =~ m{/$}) { $input =~ s{^/}{} if $config{filter_user}; $input =~ s{/$}{} if $config{filter_user}; $input = qr/$input/; } ## reset to match anything elsif ($input eq '') { $input = qr/.*/; } ## string, build a simple regex else { $input = '^' . $input . '$'; $input = qr/$input/; } } ## reset to match anything else { $input = qr/.*/; } return $input; } ########################################################################### sub cmd_l { ReadMode($RM_RESET); print RED(), "Seconds for long queries: ", RESET(); my $secs = ReadLine(0); if ($secs =~ /^\s*(\d+)/) { $config{long} = $1; if ($config{long} < 1) { $config{long} = 1; } } ReadMode($RM_NOBLKRD); } sub cmd_s { ReadMode($RM_RESET); print RED(), "Seconds of Delay: ", RESET(); my $secs = ReadLine(0); if ($secs =~ /^\s*(\d+)/) { $config{delay} = $1; if ($config{delay} < 1) { $config{delay} = 1; } } ReadMode($RM_NOBLKRD); } sub cmd_S { ReadMode($RM_RESET); print RED(), "Seconds for Slow queries: ", RESET(); my $secs = ReadLine(0); if ($secs =~ /^\s*(\d+)/) { $config{slow} = $1; if ($config{slow} < 1) { $config{slow} = 1; } } ReadMode($RM_NOBLKRD); } sub cmd_q { ReadMode($RM_RESET); print "\n"; exit; } sub trim($) { my $string = shift; $string =~ s/^\s+//; $string =~ s/\s+$//; return $string; } ########################################################################### sub PrintHelp() { my $help = qq[Help for mytop version $main::VERSION by Jeremy D. Zawodny <${YELLOW}Jeremy\@Zawodny.com${RESET}> with updates by Mark Grennan <${YELLOW}mark\@grennan.com${RESET}> and Jean Weisbuch <${YELLOW}jean\@phpnet.org${RESET}> ? - display this screen # - debug mode (toggle) c - command summary view (based on Com_* counters) C - turn color on and off d - show only a specific database e - explain the query that a thread is running E - display current replication error f - show full query info for a given thread F - unfilter the display h - show only a specifc host's connections H - toggle the mytop header i - toggle the display of idle (sleeping) threads I - show innodb status k - kill a thread p - pause the display l - change long running queries hightlighing m - switch [mode] to qps (queries/sec) scrolling view M - switch [mode] to status o - reverse the sort order (toggle) q - quit r - reset the status counters (via FLUSH STATUS on your server) R - change reverse IP lookup s - change the delay between screen updates S - change slow query hightlighting t - switch to thread view (default) u - show only a specific user V - show variables : - enter a command (not yet implemented) ! - Skip an error that has stopped replications (at your own risk) L - show full queries (do not strip to terminal width) w - adjust the User and DB columns width a - toggle the progress column Base version from ${GREEN}http://www.mysqlfanboy.com/mytop-3${RESET} This version comes as part of the ${GREEN}MariaDB${RESET} distribution. ]; print $help; } sub Sum(@) { my $sum; while (my $val = shift @_) { $sum += $val; } return $sum; } ## A useful routine from perlfaq sub commify($) { local $_ = shift; return 0 unless defined $_; 1 while s/^([-+]?\d+)(\d{3})/$1,$2/; return $_; } ## Compact numeric representation (10,000 -> 10.0k) sub make_short($) { my $number = shift; return commify($number) if $config{long_nums}; my $n = 0; while ($number > 1_025) { $number /= 1024; $n++; }; return sprintf "%.1f%s", $number, ('','k','M','G', 'T')[$n]; } ## Run a query and return the records has an array of hashes. sub Hashes($) { my $sql = shift; my @records; if (my $sth = Execute($sql)) { while (my $ref = $sth->fetchrow_hashref) { print "record\n" if $debug; push @records, $ref; } } return @records; } ## Execute an SQL query and return the statement handle. sub Execute($) { my $sql = shift; $sql =~ s/\n/ /sg; my $sth = $dbh->prepare($sql); if (not $sth) { ReadMode($RM_RESET); die $DBI::errstr; } my $ReturnCode = $sth->execute; if (not $ReturnCode) { if ($debug) { print "query failed\n"; sleep 10; } return undef; } return $sth; } #### #### my_which is used, because we can't assume that every system has the #### which command. my_which can take only one argument at a time. #### Return values: requested system command with the first found path, #### or undefined, if not found. #### sub my_which { my ($command) = @_; my (@paths, $path); return $command if (-f $command && -x $command); ## Check first if this is a source distribution, then if this binary distribution and last in the path push @paths, "./extra"; push @paths, $path_for_script; push @paths, split(':', $ENV{'PATH'}); foreach $path (@paths) { $path .= "/$command"; return $path if (-f $path && -x $path); } return undef(); } =pod =head1 SYNOPSIS B<mytop> [options] =head1 AVAILABILITY Base version from B<http://www.mysqlfanboy.com/mytop-3>. This version comes as part of the B<MariaDB> distribution. See B<https://mariadb.org/>. And older (the original) version B<mytop> is available from http://www.mysqlfanboy.com/mytop-3/ it B<might> also be on CPAN as well. =head1 REQUIREMENTS In order for B<mytop> to function properly, you must have the following: * Perl 5.005 or newer * Getopt::Long * DBI and DBD::MariaDB or DBD::mysql * Term::ReadKey from CPAN Most systems are likely to have all of those installed--except for Term::ReadKey. You will need to pick that up from the CPAN. You can pick up Term::ReadKey here: http://search.cpan.org/search?dist=TermReadKey And you obviously need access to a MariaDB server with the necessary security to run the I<SHOW PROCESSLIST> and I<SHOW STATUS> commands. If you are a Windows user, using ActiveState's Perl, you can use PPM (the Perl Package Manager) to install the MariaDB/MySQL and Term::ReadKey modules. =head2 Optional Color Support In additon, if you want a color B<mytop> (recommended), install Term::ANSIColor from the CPAN: http://search.cpan.org/search?dist=ANSIColor Once you do, B<mytop> will automatically use it. However, color is not yet working on Windows. Patches welcome. :-) =head2 Optional Hi-Res Timing If you want B<mytop> to provide more accurate real-time queries-per-second statistics, install the Time::HiRes module from CPAN. B<mytop> will automatically notice that you have it and use it rather than the standard timing mechanism. =head2 Platforms B<mytop> is known to work on: * Linux (2.2.x, 2.4.x) * FreeBSD (2.2, 3.x, 4.x) * Mac OS X * BSDI 4.x * Solaris 2.x * Windows NT 4.x (ActivePerl) If you find that it works on another platform, please let me know. Given that it is all Perl code, I expect it to be rather portable to Unix and Unix-like systems. Heck, it I<might> even work on Win32 systems. =head1 DESCRIPTION Help is always welcome in improving this software. Feel free to contact the author (see L<"AUTHOR"> below) with bug reports, fixes, suggestions, and comments. Additionally L<"BUGS"> will provide a list of things this software is not able to do yet. Having said that, here are the details on how it works and what you can do with it. =head2 The Basics B<mytop> was inspired by the system monitoring tool B<top>. I routinely use B<top> on Linux, FreeBSD, and Solaris. You are likely to notice features from each of them here. B<mytop> will connect to a MariaDB server and periodically run the I<SHOW PROCESSLIST> and I<SHOW STATUS> commands and attempt to summarize the information from them in a useful format. =head2 The Display The B<mytop> display screen is really broken into two parts. The top 4 lines (header) contain summary information about your MariaDB server. For example, you might see something like: MariaDB 10.5.0 on localhost load (3.89 3.86 3.91) up 7+23:56:31 [16:33:01] Queries: 353.4M qps: 531 Slow: 4.5k Se/In/Up/De(%): 87/02/02/00 Sorts: 2390 qps now: 651 Slow qps: 0.0 Threads: 11 ( 1/ 13) 88/01/03/00 Handler: (R/W/U/D) 82138/ 5884/ 20/ 1 Tmp: R/W/U: 13623/29501/ 79 MyISAM Key Cache Efficiency: 99.9% Bps in/out: 157.4k/ 2.2M Now in/out: 554.8k/ 2.6M The first line identifies the hostname of the server (localhost) and the version of MariaDB it is running. The right hand side shows the uptime of the MariaDB server process in days+hours:minutes:seconds format (much like FreeBSD's top) as well as the current time. The second line displays the total number of queries the server has processed, the average number of queries per second, the number of slow queries, and the percentage of Select, Insert, Update, and Delete queries. The third real-time values. First is the number of queries per second, then the number of slow queries, followed by query precentages (like on the previous line). And the fourth line displays key buffer efficiency (how often keys are read from the buffer rather than disk) and the number of bytes that MariaDB has sent and received, both over all and in the last cycle. You can toggle the header by hitting B<H> when running B<mytop>. The second part of the display lists as many threads as can fit on screen. By default they are sorted according to their idle time (least idle first). The display looks like: Id User Host Dbase Time Cmd Query or State -- ---- ---- ----- ---- --- -------------- 61 jzawodn localhost music 0 Query show processlist As you can see, the thread id, username, host from which the user is connecting, database to which the user is connected, number of seconds of idle time, the command the thread is executing, and the query info are all displayed. Often times the query info is what you are really interested in, so it is good to run B<mytop> in an xterm that is wider than the normal 80 columns if possible. The thread display color-codes the threads if you have installed color support. The current color scheme only works well in a window with a dark (like black) background. The colors are selected according to the C<Command> column of the display: Query - Yellow Sleep - White Connect - Green Slow - Bright Long - Magenta Those are purely arbitrary and will be customizable in a future release. If they annoy you just start B<mytop> with the B<--nocolor> flag or adjust your config file appropriately. =head2 Arguments B<mytop> handles long and short command-line arguments. Not all options have both long and short formats, however. The long arguments have two dashes `--'. Short arguments only have one '-'. =over =item B<-u> or B<--user> username Username to use when logging in to the MariaDB server. Default: ``B<root>''. =item B<-p> or B<--pass> or B<--password> I<password> Password to use when logging in to the MariaDB server. Default: none. WARNING: This is insecure as the password is visible for anyone. See B<--prompt> instead! =item B<-h> or B<--host> I<hostname>[B<:>I<port>] Hostname of the MariaDB server. The hostname may be followed by an option port number. Note that the port is specified separate from the host when using a config file. Default: ``B<localhost>''. =item B<--port> or B<-P> I<port> If you're running MariaDB on a non-standard port, use this to specify the port number. Default: B<3306>. =item B<-s> or B<--delay> I<seconds> How long between display refreshes. Default: B<5> =item B<-d> or B<--db> or B<--database> I<database> Use if you'd like B<mytop> to connect to a specific database by default. Default: none. =item B<-b> or B<--batch> or B<--batchmode> In batch mode, mytop runs only once, does not clear the screen, and places no limit on the number of lines it will print. This is suitable for running periodically (perhaps from B<cron>) to capture the information into a file for later viewing. You might use batch mode in a CGI script to occasionally display your MariaDB server status on the web. Default: unset. =item B<-S> or B<--socket> I</path/to/socket> If you're running B<mytop> on the same host as MariaDB/MySQL, you may wish to have it use the MariaDB/MySQL socket directly rather than a standard TCP/IP connection. If you do,just specify one. Note that specifying a socket will make B<mytop> ignore any host and/or port that you might have specified. If the socket does not exist (or the file specified is not a socket), this option will be ignored and B<mytop> will use the hostname and port number instead. Default: none. =item B<--header> or B<--noheader> Specify if you want the header to display or not. You can toggle this with the B<h> key while B<mytop> is running. Default: header. =item B<--color> or B<--nocolor> Specify if you want a color display. This has no effect if you don't have color support available. Default: If you have color support, B<mytop> will try color unless you tell it not to. =item B<-i> or B<--idle> or B<--noi> or B<--noidle> Specify if you want idle (sleeping) threads to appear in the list. If sleeping threads are omitted, the default sorting order is reversed so that the longest running queries appear at the top of the list. Default: idle. =item B<--prompt> or B<--noprompt> Specify if you want to be prompted to type in your database password. This provides a little bit more security since it not only prevents the password from viewable in a process list, but also doesn't require the password to be stored in plain text in your C<~/.mytop> config file. You will B<only> be prompted if a password has not been specified in your config file or through another command line option. Default: noprompt. =item B<--resolve> If you have skip-resolve set on MariaDB (to keep it from doing a reverse DNS lookup on each inbound connection), mytop can replace IP addresses with hostnames but toggling this option. Default: noresolve =item B<--long> or B<--nolong> For large numbers print all digits (e.g. 10.000) instead of using a more compact approximation (e.g. 10.0k). Default: nolong. =item B<-m> or B<--mode> I<mode> Specify initial mode B<qps>(queries/second), B<top>(overview), B<cmd>(command summary), B<innodb>(InnoDB status) or B<status>(). Default: B<top> =item B<--sort> or B<--nosort> Reverse sort order from ascending to descending using Idle time. Default: nosort. =back Command-line arguments will always take precedence over config file options. That happens because the config file is read I<BEFORE> the command-line arguments are applied. =head2 Config File Instead of always using bulky command-line parameters, you can also use a config files for the default value of your options. mytop will first read the [client] and [mytop] sections from your my.cnf files. After that it will read the (C<~/.mytop>) file from your home directory (if present). These are read I<before> any of your command-line arguments are processed, so your command-line arguments will override directives in the config file. Here is a sample config file C<~/.mytop> which implements the defaults described above. user=root pass= host=localhost db=test delay=5 port=3306 slow=10 socket= batchmode=0 header=1 color=1 idle=1 long=120 Using a config file will help to ensure that your database password isn't visible to users on the command-line. Just make sure that the permissions on C<~/.mytop> are such that others cannot read it (unless you want them to, of course). You may have white space on either side of the C<=> in lines of the config file. =head2 Shortcut Keys The following keys perform various actions while B<mytop> is running. Those which have not been implemented are listed as such. They are included to give the user idea of what is coming. =over =item B<?> Display help. =item B<c> Show "command counters" based on the Com_* values in SHOW STATUS. This is a new feature. Feedback welcome. =item B<C> Turn display color on and off. Default is on. =item B<d> Show only threads connected to a particular database. =item B<f> Given a thread id, display the entire query that thread was (and still may be) running. =item B<F> Disable all filtering (host, user, and db). =item B<h> Only show queries from a particular host. =item B<H> Toggle the header display. You can also specify either C<header=0> or C<header=1> in your config file to set the default behavior. =item B<i> Toggle the display of idle (sleeping) threads. If sleeping threads are filtered, the default sorting order is reversed so that the longest running queries appear at the top of the list. =item B<I> Switch to InnoDB Status mode. The output of "SHOW ENGINE INNODB STATUS" will be displayed every cycle. In a future version, this may actually summarize that data rather than producing raw output. =item B<k> Kill a thread. =item B<m> Toggle modes. Currently this switches from `top' mode to `qps' (Queries Per Second Mode). In this mode, mytop will write out one integer per second. The number written reflects the number of queries executed by the server in the previous one second interval. More modes may be added in the future. =item B<o> Reverse the default sort order. =item B<p> Pause display. =item B<q> Quit B<mytop> =item B<r> Reset the server's status counters via a I<FLUSH STATUS> command. =item B<R> Togle IP reverse lookup. Default is on. =item B<s> Change the sleep time (number of seconds between display refreshes). =item B<S> Set the number of seconds a query will need to run before it is considered old and will be highlighted. =item B<u> Show only threads owned by a giver user. =back The B<s> key has a command-line counterpart: B<-s>. The B<h> key has two command-line counterparts: B<--header> and B<--noheader>. =head1 BUGS This is more of a BUGS + WishList. Some performance information is not available when talking to a version 3.22.x MySQL server. Additional information (about threads mostly) was added to the output of I<SHOW STATUS> in MySQL 3.23.x and B<mytop> makes use of it. If the information is not available, you will simply see zeros where the real numbers should be. Simply running this program will increase your overall counters (such as the number of queries run). But you may or may not view that as a bug. B<mytop> consumes too much CPU time when running (verified on older versions of Linux and FreeBSD). It's likely a problem related to Term::ReadKey. I haven't had time to investigate yet, so B<mytop> now automatically lowers its priority when you run it. You may also think about running B<mytop> on another workstation instead of your database server. However, C<mytop> on Solaris does B<not> have this problem. Newer versions of Linux and FreeBSD seem to have fixed this. You can't specify the maximum number of threads to list. If you have many threads and a tall xterm, B<mytop> will always try to display as many as it can fit. The size of most of the columns in the display has a small maximum width. If you have fairly long database/user/host names the display may appear odd. I have no good idea as to how best to deal with that yet. Suggestions are welcome. It'd be nice if you could just add B<mytop> configuration directives in your C<my.cnf> file instead of having a separate config file. You should be able to specify the columns you'd like to see in the display and the order in which they appear. If you only have one username that connects to your database, it's probably not worth having the User column appear, for example. =head1 AUTHOR mytop was developed and is maintained by Jeremy D. Zawodny (Jeremy@Zawodny.com). If you wish to e-mail me regarding this software, B<PLEASE> subscribe to the B<mytop> mailing list. See the B<mytop> homepage for details. =head1 DISCLAIMER While I use this software in my job at Yahoo!, I am solely responsible for it. Yahoo! does not necessarily support this software in any way. It is merely a personal idea which happened to be very useful in my job. =head1 SEE ALSO Please check the MariaDB manual if you're not sure where some of the output of B<mytop> is coming from. =head1 COPYRIGHT Copyright (C) 2000-2010, Jeremy D. Zawodny. =head1 CREDITS Fix a bug. Add a feature. See your name here! Many thanks go to these fine folks: =over =item Jean Weisbuch (jean@phpnet.org) Added --fullqueries and --sort options, dynamic user and database columns width, reading of .my.cnf, state/progress column that can be disabled dynamically (when available) and various small fixes. =item Michael "Monty" Widenius <monty@askmonty.org> Fixed a couple of minor bugs that gave warnings on startup. Added support for MariaDB (show MariaDB at top and % done). Cut long server version names to display width. Made 'State' length dynamic. =item Mark Grennan (mark@grennan.com) www.linuxfangoy.com Added updates for MySQL 5.x. Added 'S' (slow) highlighting. Added 'C' to turn on and off Color. Added 'l' command to change color for long running queries. Fixed a few documentation issues. Monitors Slave status. Added color to Queue hit ratio. Added number of rows sorted per second. Created release 1.7. =item Sami Ahlroos (sami@avis-net.de) Suggested the idle/noidle stuff. =item Jan Willamowius (jan@janhh.shnet.org) Minor bug report. Documentation fixes. =item Alex Osipov (alex@acky.net) Long command-line options, Unix socket support. =item Stephane Enten (tuf@grolier.fr) Suggested batch mode. =item Richard Ellerbrock (richarde@eskom.co.za) Bug reports and usability suggestions. =item William R. Mattil (wrm@newton.irngtx.tel.gte.com) Bug report about empty passwords not working. =item Benjamin Pflugmann (philemon@spin.de) Suggested -P command-line flag as well as other changes. =item Justin Mecham <justin@aspect.net> Suggested setting $0 to `mytop'. =item Thorsten Kunz <thorsten.kunz@de.tiscali.com> Provided a fix for cases when we try remove the domain name from the display even if it is actually an IP address. =item Sasha Pachev <sasha@mysql.com> Provided the idea of real-time queries per second in the main display. =item Paul DuBois <paul@snake.net> Pointed out some option-handling bugs. =item Mike Wexler <mwexler@tias.com> Suggested that we don't mangle (normalize) whitespace in query info by default. =item Mark Zweifel <markez@yahoo-inc.com> Make the --idle command-line argument negatable. =item Axel Schwenke <schwenke@jobpilot.de> Noticed the incorrect formula for query cache hit percentages in version 1.2. =item Steven Roussey <sroussey@network54.com> Supplied a patch to help filter binary junk in queries so that terminals don't freak out. =item Jon R. Luini <falcon@chime.com> Supplied a patch that formed the basis for C<--prompt> support. Sean Leach <sleach@wiggum.com> submitted a similar patch. =item Yogish Baliga <baliga@yahoo-inc.com> Supplied a patch that formed the basis for C<--resolve> support. =item Per Andreas Buer <perbu@linpro.no> Supplied an excellent patch to tidy up the top display. This includes showing most values in short form, such as 10k rather than 10000. =back See the Changes file on the B<mytop> distribution page for more details on what has changed. =head1 LICENSE B<mytop> is licensed under the GNU General Public License version 2. For the full license information, please visit http://www.gnu.org/copyleft/gpl.html =cut __END__
New name for
Are you sure will delete
?
New date for
New perm for
Name
Type
Size
Permission
Last Modified
Actions
.
DIR
-
dr-xr-xr-x
2026-07-21 10:39:25
..
DIR
-
drwxr-xr-x
2026-07-04 08:00:23
7za
text/x-shellscript
46 B
-rwxr-xr-x
2024-10-04 01:50:29
GET
text/x-perl
15.84 KB
-rwxr-xr-x
2022-04-22 08:13:06
Mail
application/x-sharedlib
408.89 KB
-rwxr-xr-x
2019-10-13 12:19:50
[
application/x-sharedlib
53.6 KB
-rwxr-xr-x
2026-03-24 01:05:31
aclocal
text/x-perl
35.62 KB
-rwxr-xr-x
2023-10-14 08:00:43
aclocal-1.16
text/x-perl
35.62 KB
-rwxr-xr-x
2023-10-14 08:00:43
addr2line
application/x-sharedlib
33.42 KB
-rwxr-xr-x
2025-12-18 02:21:35
animate
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
ar
application/x-sharedlib
61.96 KB
-rwxr-xr-x
2025-12-18 02:21:35
arch
application/x-sharedlib
37.34 KB
-rwxr-xr-x
2026-03-24 01:05:31
arpaname
application/x-sharedlib
11.82 KB
-rwxr-xr-x
2026-06-08 03:38:10
as
application/x-sharedlib
889.91 KB
-rwxr-xr-x
2025-12-18 02:21:35
aspell
application/x-sharedlib
159.5 KB
-rwxr-xr-x
2022-04-18 03:10:53
at
text/x-shellscript
4.4 KB
-rwxr-xr-x
2022-10-10 10:23:17
atq
text/x-shellscript
4.4 KB
-rwxr-xr-x
2022-10-10 10:23:17
atrm
text/x-shellscript
4.41 KB
-rwxr-xr-x
2022-10-10 10:23:17
autoconf
text/x-shellscript
14.42 KB
-rwxr-xr-x
2024-08-13 07:30:48
autoheader
text/x-perl
8.33 KB
-rwxr-xr-x
2024-08-13 07:30:48
autom4te
text/x-perl
31.43 KB
-rwxr-xr-x
2024-08-13 07:30:48
automake
text/x-perl
251.9 KB
-rwxr-xr-x
2023-10-14 08:00:43
automake-1.16
text/x-perl
251.9 KB
-rwxr-xr-x
2023-10-14 08:00:43
autoreconf
text/x-perl
20.57 KB
-rwxr-xr-x
2024-08-13 07:30:48
autoscan
text/x-perl
16.72 KB
-rwxr-xr-x
2024-08-13 07:30:48
autoupdate
text/x-perl
33.08 KB
-rwxr-xr-x
2024-08-13 07:30:48
awk
application/x-sharedlib
669.77 KB
-rwxr-xr-x
2022-04-18 03:56:05
b2sum
application/x-sharedlib
57.69 KB
-rwxr-xr-x
2026-03-24 01:05:31
base32
application/x-sharedlib
41.47 KB
-rwxr-xr-x
2026-03-24 01:05:31
base64
application/x-sharedlib
41.48 KB
-rwxr-xr-x
2026-03-24 01:05:31
basename
application/x-sharedlib
37.41 KB
-rwxr-xr-x
2026-03-24 01:05:31
bash
application/x-sharedlib
1.1 MB
-rwxr-xr-x
2025-08-26 08:48:39
bashbug-64
text/x-shellscript
7.18 KB
-rwxr-xr-x
2025-08-26 08:48:31
batch
text/x-shellscript
137 B
-rwxr-xr-x
2022-10-10 10:23:17
bison
application/x-sharedlib
437.72 KB
-rwxr-xr-x
2019-10-12 12:28:39
bunzip2
application/x-sharedlib
36.86 KB
-rwxr-xr-x
2025-01-28 01:38:59
bzcat
application/x-sharedlib
36.86 KB
-rwxr-xr-x
2025-01-28 01:38:59
bzcmp
text/x-shellscript
2.08 KB
-rwxr-xr-x
2025-01-28 01:38:58
bzdiff
text/x-shellscript
2.08 KB
-rwxr-xr-x
2025-01-28 01:38:58
bzgrep
text/x-shellscript
1.64 KB
-rwxr-xr-x
2025-01-28 01:38:58
bzip2
application/x-sharedlib
36.86 KB
-rwxr-xr-x
2025-01-28 01:38:59
bzip2recover
application/x-sharedlib
16.44 KB
-rwxr-xr-x
2025-01-28 01:38:59
bzless
text/x-shellscript
1.23 KB
-rwxr-xr-x
2025-01-28 01:38:58
bzmore
text/x-shellscript
1.23 KB
-rwxr-xr-x
2025-01-28 01:38:58
c++
1.21 MB
-rwxr-x---
2025-08-26 09:47:24
c++filt
application/x-sharedlib
28.89 KB
-rwxr-xr-x
2025-12-18 02:21:35
c89
224 B
-rwxr-x---
2025-08-26 09:45:19
c99
215 B
-rwxr-x---
2025-08-26 09:45:19
cagefs_enter.proxied
text/x-shellscript
4.42 KB
-rwxr-xr-x
2026-01-20 01:58:37
cal
application/x-sharedlib
65.98 KB
-rwxr-xr-x
2026-02-04 08:18:19
captoinfo
application/x-sharedlib
85.31 KB
-rwxr-xr-x
2023-10-14 06:54:49
cat
application/x-sharedlib
37.46 KB
-rwxr-xr-x
2026-03-24 01:05:31
catchsegv
text/x-shellscript
3.21 KB
-rwxr-xr-x
2026-06-29 04:07:38
cc
1.21 MB
-rwxr-x---
2025-08-26 09:47:26
chgrp
application/x-sharedlib
66.29 KB
-rwxr-xr-x
2026-03-24 01:05:31
chmod
application/x-sharedlib
62.2 KB
-rwxr-xr-x
2026-03-24 01:05:31
chown
application/x-sharedlib
70.29 KB
-rwxr-xr-x
2026-03-24 01:05:31
chrt
application/x-sharedlib
37.19 KB
-rwxr-xr-x
2026-02-04 08:18:19
cksum
application/x-sharedlib
37.39 KB
-rwxr-xr-x
2026-03-24 01:05:31
cldetect
text/x-python
10.34 KB
-rwxr-xr-x
2026-06-03 10:46:51
clear
application/x-sharedlib
12.54 KB
-rwxr-xr-x
2023-10-14 06:54:49
clusterdb
application/x-sharedlib
70.23 KB
-rwxr-xr-x
2024-02-27 08:25:00
cmp
application/x-sharedlib
103.76 KB
-rwxr-xr-x
2020-05-04 03:15:14
col
application/x-sharedlib
29.01 KB
-rwxr-xr-x
2026-02-04 08:18:19
colcrt
application/x-sharedlib
16.48 KB
-rwxr-xr-x
2026-02-04 08:18:19
colrm
application/x-sharedlib
24.88 KB
-rwxr-xr-x
2026-02-04 08:18:19
column
application/x-sharedlib
49.47 KB
-rwxr-xr-x
2026-02-04 08:18:19
comm
application/x-sharedlib
41.56 KB
-rwxr-xr-x
2026-03-24 01:05:31
compare
application/x-sharedlib
11.89 KB
-rwxr-xr-x
2026-06-12 10:06:24
composite
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
conjure
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
convert
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
cp
application/x-sharedlib
147.98 KB
-rwxr-xr-x
2026-03-24 01:05:31
cpan
text/x-perl
8.17 KB
-rwxr-xr-x
2025-06-03 02:32:21
cpp
application/x-sharedlib
1.21 MB
-rwxr-xr-x
2025-08-26 09:47:25
createdb
application/x-sharedlib
70.22 KB
-rwxr-xr-x
2024-02-27 08:25:00
createuser
application/x-sharedlib
74.63 KB
-rwxr-xr-x
2024-02-27 08:25:00
crontab
text/x-shellscript
1.49 KB
-rwxr-xr-x
2026-07-13 11:37:10
crontab.cagefs
application/x-executable
54.18 KB
-rwxr-xr-x
2026-05-29 09:37:59
csplit
application/x-sharedlib
53.68 KB
-rwxr-xr-x
2026-03-24 01:05:31
curl
application/x-sharedlib
230.08 KB
-rwxr-xr-x
2026-03-24 01:41:52
cut
application/x-sharedlib
49.52 KB
-rwxr-xr-x
2026-03-24 01:05:31
date
application/x-sharedlib
105.96 KB
-rwxr-xr-x
2026-03-24 01:05:31
dd
application/x-sharedlib
77.97 KB
-rwxr-xr-x
2026-03-24 01:05:31
delv
application/x-sharedlib
42.46 KB
-rwxr-xr-x
2026-06-08 03:38:10
df
application/x-sharedlib
91.09 KB
-rwxr-xr-x
2026-03-24 01:05:31
diff
application/x-sharedlib
268.01 KB
-rwxr-xr-x
2020-05-04 03:15:14
diff3
application/x-sharedlib
128.6 KB
-rwxr-xr-x
2020-05-04 03:15:14
dig
application/x-sharedlib
162.18 KB
-rwxr-xr-x
2026-06-08 03:38:10
dir
application/x-sharedlib
139.9 KB
-rwxr-xr-x
2026-03-24 01:05:31
dircolors
application/x-sharedlib
49.55 KB
-rwxr-xr-x
2026-03-24 01:05:31
dirname
application/x-sharedlib
33.36 KB
-rwxr-xr-x
2026-03-24 01:05:31
display
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
dnstap-read
application/x-sharedlib
20.43 KB
-rwxr-xr-x
2026-06-08 03:38:10
dropdb
application/x-sharedlib
66.02 KB
-rwxr-xr-x
2024-02-27 08:25:00
dropuser
application/x-sharedlib
65.99 KB
-rwxr-xr-x
2024-02-27 08:25:00
du
application/x-sharedlib
107 KB
-rwxr-xr-x
2026-03-24 01:05:31
echo
application/x-sharedlib
37.35 KB
-rwxr-xr-x
2026-03-24 01:05:31
egrep
text/x-shellscript
28 B
-rwxr-xr-x
2019-10-11 03:15:56
enc2xs
text/x-perl
40.97 KB
-rwxr-xr-x
2019-10-13 08:46:10
enchant
application/x-sharedlib
21.08 KB
-rwxr-xr-x
2019-10-23 08:03:55
enchant-lsmod
application/x-sharedlib
13.09 KB
-rwxr-xr-x
2019-10-23 08:03:55
env
application/x-sharedlib
41.35 KB
-rwxr-xr-x
2026-03-24 01:05:31
eps2eps
text/x-shellscript
639 B
-rwxr-xr-x
2025-06-03 02:48:11
eqn
application/x-sharedlib
232.16 KB
-rwxr-xr-x
2019-10-13 02:29:41
ex
application/x-sharedlib
1.13 MB
-rwxr-xr-x
2026-07-13 08:08:02
expand
application/x-sharedlib
41.59 KB
-rwxr-xr-x
2026-03-24 01:05:31
expr
application/x-sharedlib
49.57 KB
-rwxr-xr-x
2026-03-24 01:05:31
factor
application/x-sharedlib
85.97 KB
-rwxr-xr-x
2026-03-24 01:05:31
false
application/x-sharedlib
33.32 KB
-rwxr-xr-x
2026-03-24 01:05:31
fc-cache
text/x-shellscript
132 B
-rwxr-xr-x
2021-08-16 11:04:22
fc-cache-64
application/x-sharedlib
20.35 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-cat
application/x-sharedlib
16.35 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-conflist
application/x-sharedlib
12.25 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-list
application/x-sharedlib
12.25 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-match
application/x-sharedlib
16.26 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-pattern
application/x-sharedlib
12.26 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-query
application/x-sharedlib
12.24 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-scan
application/x-sharedlib
12.26 KB
-rwxr-xr-x
2021-10-09 09:02:09
fc-validate
application/x-sharedlib
16.26 KB
-rwxr-xr-x
2021-10-09 09:02:09
fgrep
text/x-shellscript
28 B
-rwxr-xr-x
2019-10-11 03:15:56
file
application/x-sharedlib
24.69 KB
-rwxr-xr-x
2025-10-07 06:30:49
find
application/x-sharedlib
223.27 KB
-rwxr-xr-x
2025-12-18 02:57:01
flex
application/x-sharedlib
428.45 KB
-rwxr-xr-x
2019-10-12 12:33:17
flex++
application/x-sharedlib
428.45 KB
-rwxr-xr-x
2019-10-12 12:33:17
flock
application/x-sharedlib
33.2 KB
-rwxr-xr-x
2026-02-04 08:18:19
fmt
application/x-sharedlib
45.49 KB
-rwxr-xr-x
2026-03-24 01:05:31
fold
application/x-sharedlib
41.42 KB
-rwxr-xr-x
2026-03-24 01:05:31
free
application/x-sharedlib
20.79 KB
-rwxr-xr-x
2023-10-14 08:31:02
freetype-config
text/x-shellscript
4.31 KB
-rwxr-xr-x
2025-03-31 07:37:30
funzip
application/x-sharedlib
36.63 KB
-rwxr-xr-x
2025-06-03 02:10:12
g++
1.21 MB
-rwxr-x---
2025-08-26 09:47:24
gawk
application/x-sharedlib
669.77 KB
-rwxr-xr-x
2022-04-18 03:56:05
gcc
1.21 MB
-rwxr-x---
2025-08-26 09:47:26
gcc-ar
application/x-sharedlib
36.66 KB
-rwxr-xr-x
2025-08-26 09:47:26
gcc-nm
application/x-sharedlib
36.66 KB
-rwxr-xr-x
2025-08-26 09:47:26
gcc-ranlib
application/x-sharedlib
36.66 KB
-rwxr-xr-x
2025-08-26 09:47:26
gcov
application/x-sharedlib
1.31 MB
-rwxr-xr-x
2025-08-26 09:47:26
gcov-dump
application/x-sharedlib
570.96 KB
-rwxr-xr-x
2025-08-26 09:47:26
gcov-tool
application/x-sharedlib
607.77 KB
-rwxr-xr-x
2025-08-26 09:47:26
gem
text/x-ruby
542 B
-rwxr-xr-x
2026-07-03 10:46:03
gencat
application/x-sharedlib
24.84 KB
-rwxr-xr-x
2026-06-29 04:18:43
geoiplookup
application/x-sharedlib
21.89 KB
-rwxr-xr-x
2019-11-28 10:06:01
geoiplookup6
application/x-sharedlib
21.65 KB
-rwxr-xr-x
2019-11-28 10:06:01
geqn
application/x-sharedlib
232.16 KB
-rwxr-xr-x
2019-10-13 02:29:41
getconf
application/x-sharedlib
32.46 KB
-rwxr-xr-x
2026-06-29 04:18:43
getent
application/x-sharedlib
33.13 KB
-rwxr-xr-x
2026-06-29 04:18:43
getopt
application/x-sharedlib
20.53 KB
-rwxr-xr-x
2026-02-04 08:18:19
ghostscript
application/x-sharedlib
12.35 KB
-rwxr-xr-x
2025-06-03 02:48:22
git
application/x-sharedlib
3.67 MB
-rwxr-xr-x
2025-07-23 06:59:57
git-receive-pack
application/x-sharedlib
3.67 MB
-rwxr-xr-x
2025-07-23 06:59:57
git-shell
application/x-sharedlib
2.13 MB
-rwxr-xr-x
2025-07-23 06:59:57
git-upload-archive
application/x-sharedlib
3.67 MB
-rwxr-xr-x
2025-07-23 06:59:57
git-upload-pack
application/x-sharedlib
3.67 MB
-rwxr-xr-x
2025-07-23 06:59:57
gm
application/x-sharedlib
7.82 KB
-rwxr-xr-x
2022-03-28 03:50:37
gmake
application/x-sharedlib
235.32 KB
-rwxr-xr-x
2022-04-18 04:38:34
gneqn
text/x-shellscript
908 B
-rwxr-xr-x
2019-10-13 02:29:37
gnroff
text/x-shellscript
3.23 KB
-rwxr-xr-x
2019-10-13 02:29:39
gpg
application/x-sharedlib
1.04 MB
-rwxr-xr-x
2026-01-16 01:48:25
gpg-agent
application/x-sharedlib
419.3 KB
-rwxr-xr-x
2026-01-16 01:48:25
gpg-error
application/x-sharedlib
34.16 KB
-rwxr-xr-x
2019-10-12 12:20:46
gpg-zip
text/x-shellscript
3.44 KB
-rwxr-xr-x
2026-01-16 01:48:21
gpgsplit
application/x-sharedlib
87.02 KB
-rwxr-xr-x
2026-01-16 01:48:25
gpgv
application/x-sharedlib
451.51 KB
-rwxr-xr-x
2026-01-16 01:48:25
gpic
application/x-sharedlib
293.84 KB
-rwxr-xr-x
2019-10-13 02:29:41
gprof
application/x-sharedlib
103.35 KB
-rwxr-xr-x
2025-12-18 02:21:35
grep
application/x-sharedlib
193.63 KB
-rwxr-xr-x
2019-10-11 03:15:57
groff
application/x-sharedlib
124.92 KB
-rwxr-xr-x
2019-10-13 02:29:41
grops
application/x-sharedlib
191.14 KB
-rwxr-xr-x
2019-10-13 02:29:41
grotty
application/x-sharedlib
141.9 KB
-rwxr-xr-x
2019-10-13 02:29:41
groups
application/x-sharedlib
37.39 KB
-rwxr-xr-x
2026-03-24 01:05:31
gs
application/x-sharedlib
12.35 KB
-rwxr-xr-x
2025-06-03 02:48:22
gsnd
text/x-shellscript
277 B
-rwxr-xr-x
2025-06-03 02:48:11
gsoelim
application/x-sharedlib
42.55 KB
-rwxr-xr-x
2019-10-13 02:29:41
gtar
application/x-sharedlib
448.99 KB
-rwxr-xr-x
2025-08-26 08:57:37
gtbl
application/x-sharedlib
154.61 KB
-rwxr-xr-x
2019-10-13 02:29:41
gtroff
application/x-sharedlib
805.02 KB
-rwxr-xr-x
2019-10-13 02:29:41
gunzip
text/x-shellscript
2.29 KB
-rwxr-xr-x
2022-04-27 05:49:28
gzexe
text/x-shellscript
6.23 KB
-rwxr-xr-x
2022-04-27 05:49:28
gzip
application/x-sharedlib
94.67 KB
-rwxr-xr-x
2022-04-27 05:49:29
h2ph
text/x-perl
28.69 KB
-rwxr-xr-x
2025-07-28 08:08:32
h2xs
text/x-perl
59.44 KB
-rwxr-xr-x
2025-07-28 08:07:09
head
application/x-sharedlib
45.5 KB
-rwxr-xr-x
2026-03-24 01:05:31
hexdump
application/x-sharedlib
57.51 KB
-rwxr-xr-x
2026-02-04 08:18:19
host
application/x-sharedlib
142.3 KB
-rwxr-xr-x
2026-06-08 03:38:10
hostid
application/x-sharedlib
33.34 KB
-rwxr-xr-x
2026-03-24 01:05:31
hostname
application/x-sharedlib
21.16 KB
-rwxr-xr-x
2019-10-11 01:06:51
hunspell
application/x-sharedlib
144.7 KB
-rwxr-xr-x
2019-10-13 08:33:15
iconv
application/x-sharedlib
61.43 KB
-rwxr-xr-x
2026-06-29 04:18:43
id
application/x-sharedlib
45.44 KB
-rwxr-xr-x
2026-03-24 01:05:31
identify
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
idn
application/x-sharedlib
39.41 KB
-rwxr-xr-x
2019-10-13 04:55:35
ifnames
text/x-perl
4.03 KB
-rwxr-xr-x
2024-08-13 07:30:48
import
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
infocmp
application/x-sharedlib
61.05 KB
-rwxr-xr-x
2023-10-14 06:54:49
infotocap
application/x-sharedlib
85.31 KB
-rwxr-xr-x
2023-10-14 06:54:49
install
application/x-sharedlib
156.16 KB
-rwxr-xr-x
2026-03-24 01:05:31
instmodsh
text/x-perl
4.1 KB
-rwxr-xr-x
2019-10-13 08:55:21
ionice
application/x-sharedlib
28.98 KB
-rwxr-xr-x
2026-02-04 08:18:19
ipcrm
application/x-sharedlib
28.99 KB
-rwxr-xr-x
2026-02-04 08:18:19
ipcs
application/x-sharedlib
53.4 KB
-rwxr-xr-x
2026-02-04 08:18:19
isosize
application/x-sharedlib
24.88 KB
-rwxr-xr-x
2026-02-04 08:18:19
ispell
text/x-shellscript
988 B
-rwxr-xr-x
2022-04-18 03:10:51
join
application/x-sharedlib
53.7 KB
-rwxr-xr-x
2026-03-24 01:05:31
kill
application/x-sharedlib
37.28 KB
-rwxr-xr-x
2026-02-04 08:18:19
ld
1.71 MB
-rwxr-x---
2025-12-18 02:21:35
ld.bfd
1.71 MB
-rwxr-x---
2025-12-18 02:21:35
ldd
text/x-shellscript
5.31 KB
-rwxr-xr-x
2026-06-29 04:07:42
less
application/x-sharedlib
173.76 KB
-rwxr-xr-x
2024-07-02 08:10:37
lessecho
application/x-sharedlib
12.4 KB
-rwxr-xr-x
2024-07-02 08:10:37
lesskey
application/x-sharedlib
21.99 KB
-rwxr-xr-x
2024-07-02 08:10:37
lesspipe.sh
text/x-shellscript
3.07 KB
-rwxr-xr-x
2024-07-02 07:57:10
lex
application/x-sharedlib
428.45 KB
-rwxr-xr-x
2019-10-12 12:33:17
libnetcfg
text/x-perl
15.41 KB
-rwxr-xr-x
2025-07-28 08:08:32
libtool
text/x-shellscript
359.11 KB
-rwxr-xr-x
2019-10-11 02:55:28
libtoolize
text/x-shellscript
126.17 KB
-rwxr-xr-x
2019-10-11 02:55:28
link
application/x-sharedlib
33.34 KB
-rwxr-xr-x
2026-03-24 01:05:31
ln
application/x-sharedlib
70.5 KB
-rwxr-xr-x
2026-03-24 01:05:31
locale
application/x-sharedlib
56.44 KB
-rwxr-xr-x
2026-06-29 04:18:43
localedef
application/x-sharedlib
307.47 KB
-rwxr-xr-x
2026-06-29 04:18:43
logger
application/x-sharedlib
49.98 KB
-rwxr-xr-x
2026-02-04 08:18:19
login
application/x-sharedlib
40.96 KB
-rwxr-xr-x
2026-02-04 08:18:19
logname
application/x-sharedlib
33.34 KB
-rwxr-xr-x
2026-03-24 01:05:31
look
application/x-sharedlib
16.46 KB
-rwxr-xr-x
2026-02-04 08:18:19
ls
application/x-sharedlib
139.91 KB
-rwxr-xr-x
2026-03-24 01:05:31
lynx
application/x-sharedlib
1.84 MB
-rwxr-xr-x
2022-04-18 09:01:05
m4
application/x-sharedlib
185.56 KB
-rwxr-xr-x
2019-10-11 02:41:40
mail
application/x-sharedlib
408.89 KB
-rwxr-xr-x
2019-10-13 12:19:50
mailx
application/x-sharedlib
408.89 KB
-rwxr-xr-x
2019-10-13 12:19:50
make
application/x-sharedlib
235.32 KB
-rwxr-xr-x
2022-04-18 04:38:34
make-dummy-cert
text/x-shellscript
610 B
-rwxr-xr-x
2026-07-13 02:12:11
mariadb
application/x-sharedlib
5.26 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-access
text/x-perl
109.48 KB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-admin
application/x-sharedlib
4.82 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-binlog
application/x-sharedlib
5.08 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-check
application/x-sharedlib
4.82 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-conv
application/x-sharedlib
4.55 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-convert-table-format
text/x-perl
4.28 KB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-dump
application/x-sharedlib
4.91 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-dumpslow
text/x-perl
8.19 KB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-embedded
application/x-sharedlib
24.05 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-find-rows
text/x-perl
3.35 KB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-hotcopy
text/x-perl
34.67 KB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-import
application/x-sharedlib
4.81 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-plugin
application/x-sharedlib
4.53 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-secure-installation
text/x-shellscript
13.65 KB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-setpermission
text/x-perl
17.7 KB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-show
application/x-sharedlib
4.81 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-slap
application/x-sharedlib
4.83 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-tzinfo-to-sql
application/x-sharedlib
4.52 MB
-rwxr-xr-x
2026-06-11 11:52:53
mariadb-waitpid
application/x-sharedlib
4.51 MB
-rwxr-xr-x
2026-06-11 11:52:53
mc
application/x-sharedlib
1.3 MB
-rwxr-xr-x
2019-10-18 08:38:40
mcdiff
application/x-sharedlib
1.3 MB
-rwxr-xr-x
2019-10-18 08:38:40
mcedit
application/x-sharedlib
1.3 MB
-rwxr-xr-x
2019-10-18 08:38:40
mcookie
application/x-sharedlib
33.27 KB
-rwxr-xr-x
2026-02-04 08:18:19
mcview
application/x-sharedlib
1.3 MB
-rwxr-xr-x
2019-10-18 08:38:40
md5sum
application/x-sharedlib
45.54 KB
-rwxr-xr-x
2026-03-24 01:05:31
mesg
application/x-sharedlib
16.36 KB
-rwxr-xr-x
2026-02-04 08:18:19
mkdir
application/x-sharedlib
82.7 KB
-rwxr-xr-x
2026-03-24 01:05:31
mkfifo
application/x-sharedlib
66.46 KB
-rwxr-xr-x
2026-03-24 01:05:31
mktemp
application/x-sharedlib
45.66 KB
-rwxr-xr-x
2026-03-24 01:05:31
mogrify
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
montage
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2026-06-12 10:06:24
more
application/x-sharedlib
44.94 KB
-rwxr-xr-x
2026-02-04 08:18:19
msql2mysql
text/x-shellscript
1.41 KB
-rwxr-xr-x
2026-06-11 11:52:53
mv
application/x-sharedlib
143.96 KB
-rwxr-xr-x
2026-03-24 01:05:31
my_print_defaults
application/x-sharedlib
4.51 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysql
application/x-sharedlib
5.26 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysql_config
text/x-shellscript
4.47 KB
-rwxr-xr-x
2026-06-11 11:52:54
mysql_find_rows
text/x-perl
3.35 KB
-rwxr-xr-x
2026-06-11 11:52:53
mysql_waitpid
application/x-sharedlib
4.51 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysqlaccess
text/x-perl
109.48 KB
-rwxr-xr-x
2026-06-11 11:52:53
mysqladmin
application/x-sharedlib
4.82 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysqlbinlog
application/x-sharedlib
5.08 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysqlcheck
application/x-sharedlib
4.82 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysqldump
application/x-sharedlib
4.91 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysqlimport
application/x-sharedlib
4.81 MB
-rwxr-xr-x
2026-06-11 11:52:53
mysqlshow
application/x-sharedlib
4.81 MB
-rwxr-xr-x
2026-06-11 11:52:53
mytop
text/x-perl
72.03 KB
-rwxr-xr-x
2026-06-11 11:52:53
namei
application/x-sharedlib
33.1 KB
-rwxr-xr-x
2026-02-04 08:18:19
nano
application/x-sharedlib
247.94 KB
-rwxr-xr-x
2024-09-24 02:16:19
neqn
text/x-shellscript
908 B
-rwxr-xr-x
2019-10-13 02:29:37
nice
application/x-sharedlib
37.33 KB
-rwxr-xr-x
2026-03-24 01:05:31
nl
application/x-sharedlib
45.55 KB
-rwxr-xr-x
2026-03-24 01:05:31
nm
application/x-sharedlib
50.38 KB
-rwxr-xr-x
2025-12-18 02:21:35
nohup
application/x-sharedlib
37.41 KB
-rwxr-xr-x
2026-03-24 01:05:31
nproc
application/x-sharedlib
37.41 KB
-rwxr-xr-x
2026-03-24 01:05:31
nroff
text/x-shellscript
3.23 KB
-rwxr-xr-x
2019-10-13 02:29:39
nslookup
application/x-sharedlib
146.26 KB
-rwxr-xr-x
2026-06-08 03:38:10
nsupdate
application/x-sharedlib
73.05 KB
-rwxr-xr-x
2026-06-08 03:38:10
numfmt
application/x-sharedlib
65.64 KB
-rwxr-xr-x
2026-03-24 01:05:31
objcopy
application/x-sharedlib
240.07 KB
-rwxr-xr-x
2025-12-18 02:21:35
objdump
application/x-sharedlib
419.76 KB
-rwxr-xr-x
2025-12-18 02:21:35
od
application/x-sharedlib
73.8 KB
-rwxr-xr-x
2026-03-24 01:05:31
openssl
application/x-sharedlib
745.95 KB
-rwxr-xr-x
2026-07-13 02:12:27
pango-list
application/x-sharedlib
11.88 KB
-rwxr-xr-x
2021-10-08 03:22:06
pango-view
application/x-sharedlib
57.44 KB
-rwxr-xr-x
2021-10-08 03:22:06
passwd
text/x-shellscript
4.41 KB
-rwxr-xr-x
2022-04-18 10:59:33
paste
application/x-sharedlib
37.4 KB
-rwxr-xr-x
2026-03-24 01:05:31
patch
application/x-sharedlib
206.46 KB
-rwxr-xr-x
2020-06-01 03:14:25
pathchk
application/x-sharedlib
37.34 KB
-rwxr-xr-x
2026-03-24 01:05:31
pdf2dsc
text/x-shellscript
698 B
-rwxr-xr-x
2025-06-03 02:48:11
pdf2ps
text/x-shellscript
909 B
-rwxr-xr-x
2025-06-03 02:48:11
perl
application/x-sharedlib
12.43 KB
-rwxr-xr-x
2025-07-28 08:07:20
perl5.26.3
application/x-sharedlib
12.43 KB
-rwxr-xr-x
2025-07-28 08:07:20
perlbug
text/x-perl
44.39 KB
-rwxr-xr-x
2025-07-28 08:08:32
perldoc
text/x-perl
118 B
-rwxr-xr-x
2019-10-13 11:53:57
perlivp
text/x-perl
10.56 KB
-rwxr-xr-x
2025-07-28 08:07:09
perlml
application/x-executable
6.61 KB
-rwxr-xr-x
2025-10-02 07:40:04
perlthanks
text/x-perl
44.39 KB
-rwxr-xr-x
2025-07-28 08:08:32
pg_dump
application/x-sharedlib
399.43 KB
-rwxr-xr-x
2024-02-27 08:25:00
pg_dumpall
application/x-sharedlib
107.11 KB
-rwxr-xr-x
2024-02-27 08:25:00
pg_restore
application/x-sharedlib
173.34 KB
-rwxr-xr-x
2024-02-27 08:25:00
pgrep
application/x-sharedlib
28.84 KB
-rwxr-xr-x
2023-10-14 08:31:02
php
text/x-perl
937 B
-rwxr-xr-x
2025-04-03 11:08:35
pic
application/x-sharedlib
293.84 KB
-rwxr-xr-x
2019-10-13 02:29:41
piconv
text/x-perl
8.08 KB
-rwxr-xr-x
2019-10-13 08:46:10
pinentry
text/x-shellscript
2.35 KB
-rwxr-xr-x
2018-08-12 05:18:10
pinentry-curses
application/x-sharedlib
77.89 KB
-rwxr-xr-x
2019-11-24 05:39:34
ping
application/x-sharedlib
66.13 KB
-rwxr-xr-x
2023-10-14 05:19:01
pinky
application/x-sharedlib
41.46 KB
-rwxr-xr-x
2026-03-24 01:05:31
pkg-config
application/x-sharedlib
40.04 KB
-rwxr-xr-x
2019-10-13 06:57:31
pkgconf
application/x-sharedlib
40.04 KB
-rwxr-xr-x
2019-10-13 06:57:31
pkill
application/x-sharedlib
28.84 KB
-rwxr-xr-x
2023-10-14 08:31:02
pl2pm
text/x-perl
4.43 KB
-rwxr-xr-x
2025-07-28 08:08:16
pmap
application/x-sharedlib
32.78 KB
-rwxr-xr-x
2023-10-14 08:31:02
pod2html
text/x-perl
4.04 KB
-rwxr-xr-x
2025-07-28 08:08:32
pod2man
text/x-perl
14.68 KB
-rwxr-xr-x
2019-10-13 02:12:32
pod2text
text/x-perl
10.55 KB
-rwxr-xr-x
2019-10-13 02:12:32
pod2usage
text/x-perl
3.86 KB
-rwxr-xr-x
2019-10-13 11:57:18
podchecker
text/x-perl
3.57 KB
-rwxr-xr-x
2019-10-13 11:46:35
podselect
text/x-perl
2.47 KB
-rwxr-xr-x
2019-10-13 11:52:55
post-grohtml
application/x-sharedlib
238.73 KB
-rwxr-xr-x
2019-10-13 02:29:41
pr
application/x-sharedlib
82.15 KB
-rwxr-xr-x
2026-03-24 01:05:31
pre-grohtml
application/x-sharedlib
130.55 KB
-rwxr-xr-x
2019-10-13 02:29:41
precat
text/x-shellscript
5.52 KB
-rwxr-xr-x
2022-04-18 03:10:50
preunzip
text/x-shellscript
5.52 KB
-rwxr-xr-x
2022-04-18 03:10:50
prezip
text/x-shellscript
5.52 KB
-rwxr-xr-x
2022-04-18 03:10:50
prezip-bin
application/x-sharedlib
11.98 KB
-rwxr-xr-x
2022-04-18 03:10:53
printenv
application/x-sharedlib
33.32 KB
-rwxr-xr-x
2026-03-24 01:05:31
printf
application/x-sharedlib
53.56 KB
-rwxr-xr-x
2026-03-24 01:05:31
prove
text/x-perl
13.24 KB
-rwxr-xr-x
2019-10-13 12:42:34
ps
application/x-sharedlib
134.75 KB
-rwxr-xr-x
2023-10-14 08:31:02
ps2ascii
text/x-shellscript
631 B
-rwxr-xr-x
2025-06-03 02:48:11
ps2epsi
text/x-shellscript
2.69 KB
-rwxr-xr-x
2025-06-03 02:48:11
ps2pdf
text/x-shellscript
272 B
-rwxr-xr-x
2025-06-03 02:48:11
ps2pdf12
text/x-shellscript
215 B
-rwxr-xr-x
2025-06-03 02:48:11
ps2pdf13
text/x-shellscript
215 B
-rwxr-xr-x
2025-06-03 02:48:11
ps2pdf14
text/x-shellscript
215 B
-rwxr-xr-x
2025-06-03 02:48:11
ps2pdfwr
text/x-shellscript
1.07 KB
-rwxr-xr-x
2025-06-03 02:48:11
ps2ps
text/x-shellscript
647 B
-rwxr-xr-x
2025-06-03 02:48:11
ps2ps2
text/x-shellscript
669 B
-rwxr-xr-x
2025-06-03 02:48:11
psql
application/x-sharedlib
644.33 KB
-rwxr-xr-x
2024-02-27 08:25:00
ptx
application/x-sharedlib
78 KB
-rwxr-xr-x
2026-03-24 01:05:31
pwd
application/x-sharedlib
37.42 KB
-rwxr-xr-x
2026-03-24 01:05:31
pwdx
application/x-sharedlib
12.68 KB
-rwxr-xr-x
2023-10-14 08:31:02
python2
application/x-sharedlib
7.84 KB
-rwxr-xr-x
2024-04-10 04:58:50
python2.7
application/x-sharedlib
7.84 KB
-rwxr-xr-x
2024-04-10 04:58:50
python3
application/x-sharedlib
11.59 KB
-rwxr-xr-x
2026-07-14 04:22:29
python3.6
application/x-sharedlib
11.59 KB
-rwxr-xr-x
2026-07-14 04:22:29
python3.6m
application/x-sharedlib
11.59 KB
-rwxr-xr-x
2026-07-14 04:22:29
ranlib
application/x-sharedlib
61.97 KB
-rwxr-xr-x
2025-12-18 02:21:35
readelf
application/x-sharedlib
624.54 KB
-rwxr-xr-x
2025-12-18 02:21:35
readlink
application/x-sharedlib
45.88 KB
-rwxr-xr-x
2026-03-24 01:05:31
realpath
application/x-sharedlib
49.94 KB
-rwxr-xr-x
2026-03-24 01:05:31
recode
application/x-sharedlib
47.03 KB
-rwxr-xr-x
2019-10-18 03:18:02
reindexdb
application/x-sharedlib
70.32 KB
-rwxr-xr-x
2024-02-27 08:25:00
rename
application/x-sharedlib
16.5 KB
-rwxr-xr-x
2026-02-04 08:18:19
renew-dummy-cert
text/x-shellscript
725 B
-rwxr-xr-x
2026-07-13 02:12:11
renice
application/x-sharedlib
16.46 KB
-rwxr-xr-x
2026-02-04 08:18:19
replace
application/x-sharedlib
4.49 MB
-rwxr-xr-x
2026-06-11 11:52:53
reset
application/x-sharedlib
24.76 KB
-rwxr-xr-x
2023-10-14 06:54:49
rev
application/x-sharedlib
12.46 KB
-rwxr-xr-x
2026-02-04 08:18:19
rm
application/x-sharedlib
70.38 KB
-rwxr-xr-x
2026-03-24 01:05:31
rmdir
application/x-sharedlib
45.46 KB
-rwxr-xr-x
2026-03-24 01:05:31
rnano
application/x-sharedlib
247.94 KB
-rwxr-xr-x
2024-09-24 02:16:19
rsync
application/x-sharedlib
522.35 KB
-rwxr-xr-x
2026-06-16 05:52:34
ruby
application/x-sharedlib
11.84 KB
-rwxr-xr-x
2026-07-03 10:44:05
run-with-aspell
text/x-shellscript
85 B
-rwxr-xr-x
2022-04-18 03:10:50
rvi
application/x-sharedlib
1.13 MB
-rwxr-xr-x
2026-07-13 08:08:02
rview
application/x-sharedlib
1.13 MB
-rwxr-xr-x
2026-07-13 08:08:02
rvim
application/x-sharedlib
2.93 MB
-rwxr-xr-x
2026-07-13 08:08:02
scalar
application/x-sharedlib
2.18 MB
-rwxr-xr-x
2025-07-23 06:59:57
scl
application/x-sharedlib
36.87 KB
-rwxr-xr-x
2023-04-01 04:10:31
scl_enabled
text/x-shellscript
258 B
-rwxr-xr-x
2017-08-25 08:23:02
scl_source
text/x-shellscript
1.82 KB
-rwxr-xr-x
2023-04-01 04:10:31
scp
application/x-sharedlib
102.84 KB
-rwxr-xr-x
2026-05-04 08:25:30
screen
application/x-sharedlib
482.46 KB
-rwxr-xr-x
2021-05-05 10:04:06
script
application/x-sharedlib
36.8 KB
-rwxr-xr-x
2026-02-04 08:18:19
sdiff
application/x-sharedlib
105.33 KB
-rwxr-xr-x
2020-05-04 03:15:14
sed
application/x-sharedlib
115.27 KB
-rwxr-xr-x
2026-04-14 07:22:48
selectorctl
text/x-python
7.63 KB
-rwxr-xr-x
2026-07-01 09:06:54
seq
application/x-sharedlib
53.45 KB
-rwxr-xr-x
2026-03-24 01:05:31
setsid
application/x-sharedlib
16.38 KB
-rwxr-xr-x
2026-02-04 08:18:19
setterm
application/x-sharedlib
45.13 KB
-rwxr-xr-x
2026-02-04 08:18:19
sftp
application/x-sharedlib
159.74 KB
-rwxr-xr-x
2026-05-04 08:25:30
sh
application/x-sharedlib
1.1 MB
-rwxr-xr-x
2025-08-26 08:48:39
sha1sum
application/x-sharedlib
45.55 KB
-rwxr-xr-x
2026-03-24 01:05:31
sha224sum
application/x-sharedlib
45.58 KB
-rwxr-xr-x
2026-03-24 01:05:31
sha256sum
application/x-sharedlib
45.58 KB
-rwxr-xr-x
2026-03-24 01:05:31
sha384sum
application/x-sharedlib
45.59 KB
-rwxr-xr-x
2026-03-24 01:05:31
sha512sum
application/x-sharedlib
45.59 KB
-rwxr-xr-x
2026-03-24 01:05:31
shred
application/x-sharedlib
61.85 KB
-rwxr-xr-x
2026-03-24 01:05:31
shuf
application/x-sharedlib
58.09 KB
-rwxr-xr-x
2026-03-24 01:05:31
size
application/x-sharedlib
33.25 KB
-rwxr-xr-x
2025-12-18 02:21:35
skill
application/x-sharedlib
28.8 KB
-rwxr-xr-x
2023-10-14 08:31:02
slabtop
application/x-sharedlib
20.84 KB
-rwxr-xr-x
2023-10-14 08:31:02
sleep
application/x-sharedlib
37.4 KB
-rwxr-xr-x
2026-03-24 01:05:31
snice
application/x-sharedlib
28.8 KB
-rwxr-xr-x
2023-10-14 08:31:02
soelim
application/x-sharedlib
42.55 KB
-rwxr-xr-x
2019-10-13 02:29:41
sort
application/x-sharedlib
123.48 KB
-rwxr-xr-x
2026-03-24 01:05:31
spell
text/x-shellscript
122 B
-rwxr-xr-x
2022-04-18 03:10:51
splain
text/x-perl
18.7 KB
-rwxr-xr-x
2025-07-28 08:08:32
split
application/x-sharedlib
58.05 KB
-rwxr-xr-x
2026-03-24 01:05:31
sprof
application/x-sharedlib
28.67 KB
-rwxr-xr-x
2026-06-29 04:18:43
sqlite3
application/x-sharedlib
1.28 MB
-rwxr-xr-x
2025-07-29 01:27:56
ssh
application/x-sharedlib
757.61 KB
-rwxr-xr-x
2026-05-04 08:25:30
ssh-add
application/x-sharedlib
346.13 KB
-rwxr-xr-x
2026-05-04 08:25:30
ssh-agent
application/x-sharedlib
325.59 KB
-rwxr-xr-x
2026-05-04 08:25:30
ssh-copy-id
text/x-shellscript
10.44 KB
-rwxr-xr-x
2026-05-04 08:25:29
ssh-keygen
application/x-sharedlib
427.17 KB
-rwxr-xr-x
2026-05-04 08:25:30
ssh-keyscan
application/x-sharedlib
432.59 KB
-rwxr-xr-x
2026-05-04 08:25:30
stat
application/x-sharedlib
86.16 KB
-rwxr-xr-x
2026-03-24 01:05:31
stdbuf
application/x-sharedlib
49.5 KB
-rwxr-xr-x
2026-03-24 01:05:31
strace
application/x-sharedlib
1.94 MB
-rwxr-xr-x
2025-01-28 01:32:17
stream
application/x-sharedlib
11.87 KB
-rwxr-xr-x
2026-06-12 10:06:24
strings
application/x-sharedlib
37.43 KB
-rwxr-xr-x
2025-12-18 02:21:35
strip
application/x-sharedlib
240.09 KB
-rwxr-xr-x
2025-12-18 02:21:35
stty
application/x-sharedlib
77.61 KB
-rwxr-xr-x
2026-03-24 01:05:31
sum
application/x-sharedlib
45.53 KB
-rwxr-xr-x
2026-03-24 01:05:31
sync
application/x-sharedlib
37.35 KB
-rwxr-xr-x
2026-03-24 01:05:31
tabs
application/x-sharedlib
16.55 KB
-rwxr-xr-x
2023-10-14 06:54:49
tac
application/x-sharedlib
41.49 KB
-rwxr-xr-x
2026-03-24 01:05:31
tail
application/x-sharedlib
74.13 KB
-rwxr-xr-x
2026-03-24 01:05:31
tar
application/x-sharedlib
448.99 KB
-rwxr-xr-x
2025-08-26 08:57:37
taskset
application/x-sharedlib
37.26 KB
-rwxr-xr-x
2026-02-04 08:18:19
tbl
application/x-sharedlib
154.61 KB
-rwxr-xr-x
2019-10-13 02:29:41
tclsh
application/x-sharedlib
9.04 KB
-rwxr-xr-x
2019-10-12 12:25:32
tclsh8.6
application/x-sharedlib
9.04 KB
-rwxr-xr-x
2019-10-12 12:25:32
tee
application/x-sharedlib
41.48 KB
-rwxr-xr-x
2026-03-24 01:05:31
test
application/x-sharedlib
53.55 KB
-rwxr-xr-x
2026-03-24 01:05:31
tic
application/x-sharedlib
85.31 KB
-rwxr-xr-x
2023-10-14 06:54:49
timeout
application/x-sharedlib
41.85 KB
-rwxr-xr-x
2026-03-24 01:05:31
tload
application/x-sharedlib
16.76 KB
-rwxr-xr-x
2023-10-14 08:31:02
tmpwatch
application/x-sharedlib
35.47 KB
-rwxr-xr-x
2019-10-12 11:32:29
toe
application/x-sharedlib
16.45 KB
-rwxr-xr-x
2023-10-14 06:54:49
top
application/x-sharedlib
121.7 KB
-rwxr-xr-x
2023-10-14 08:31:02
touch
application/x-sharedlib
93.94 KB
-rwxr-xr-x
2026-03-24 01:05:31
tput
application/x-sharedlib
24.8 KB
-rwxr-xr-x
2023-10-14 06:54:49
tr
application/x-sharedlib
49.63 KB
-rwxr-xr-x
2026-03-24 01:05:31
traceroute
application/x-sharedlib
70.97 KB
-rwxr-xr-x
2025-03-11 07:45:53
troff
application/x-sharedlib
805.02 KB
-rwxr-xr-x
2019-10-13 02:29:41
true
application/x-sharedlib
33.33 KB
-rwxr-xr-x
2026-03-24 01:05:31
truncate
application/x-sharedlib
41.36 KB
-rwxr-xr-x
2026-03-24 01:05:31
tset
application/x-sharedlib
24.76 KB
-rwxr-xr-x
2023-10-14 06:54:49
tsort
application/x-sharedlib
41.49 KB
-rwxr-xr-x
2026-03-24 01:05:31
tty
application/x-sharedlib
33.31 KB
-rwxr-xr-x
2026-03-24 01:05:31
tzselect
text/x-shellscript
15.01 KB
-rwxr-xr-x
2026-06-29 04:07:14
uapi
text/x-shellscript
4.41 KB
-rwxr-xr-x
2026-06-11 09:41:50
ul
application/x-sharedlib
20.59 KB
-rwxr-xr-x
2026-02-04 08:18:19
uname
application/x-sharedlib
37.33 KB
-rwxr-xr-x
2026-03-24 01:05:31
unexpand
application/x-sharedlib
45.61 KB
-rwxr-xr-x
2026-03-24 01:05:31
uniq
application/x-sharedlib
49.64 KB
-rwxr-xr-x
2026-03-24 01:05:31
unlink
application/x-sharedlib
33.34 KB
-rwxr-xr-x
2026-03-24 01:05:31
unzip
application/x-sharedlib
201.88 KB
-rwxr-xr-x
2025-06-03 02:10:12
unzipsfx
application/x-sharedlib
101.48 KB
-rwxr-xr-x
2025-06-03 02:10:12
uptime
application/x-sharedlib
12.59 KB
-rwxr-xr-x
2023-10-14 08:31:02
users
application/x-sharedlib
37.4 KB
-rwxr-xr-x
2026-03-24 01:05:31
utmpdump
application/x-sharedlib
28.66 KB
-rwxr-xr-x
2026-02-04 08:18:19
vacuumdb
application/x-sharedlib
78.46 KB
-rwxr-xr-x
2024-02-27 08:25:00
vdir
application/x-sharedlib
139.91 KB
-rwxr-xr-x
2026-03-24 01:05:31
vi
application/x-sharedlib
1.13 MB
-rwxr-xr-x
2026-07-13 08:08:02
view
application/x-sharedlib
1.13 MB
-rwxr-xr-x
2026-07-13 08:08:02
vim
application/x-sharedlib
2.93 MB
-rwxr-xr-x
2026-07-13 08:08:02
vimdiff
application/x-sharedlib
2.93 MB
-rwxr-xr-x
2026-07-13 08:08:02
vimtutor
text/x-shellscript
2.07 KB
-rwxr-xr-x
2026-07-13 08:07:58
vmstat
application/x-sharedlib
36.79 KB
-rwxr-xr-x
2023-10-14 08:31:02
watch
application/x-sharedlib
29.19 KB
-rwxr-xr-x
2023-10-14 08:31:02
wc
application/x-sharedlib
49.64 KB
-rwxr-xr-x
2026-03-24 01:05:31
wget
application/x-sharedlib
521.41 KB
-rwxr-xr-x
2024-08-13 10:22:56
whereis
application/x-sharedlib
29.27 KB
-rwxr-xr-x
2026-02-04 08:18:19
which
application/x-sharedlib
29.38 KB
-rwxr-xr-x
2025-08-26 08:54:45
who
application/x-sharedlib
53.59 KB
-rwxr-xr-x
2026-03-24 01:05:31
whoami
application/x-sharedlib
33.34 KB
-rwxr-xr-x
2026-03-24 01:05:31
word-list-compress
application/x-sharedlib
11.99 KB
-rwxr-xr-x
2022-04-18 03:10:53
x86_64-redhat-linux-c++
1.21 MB
-rwxr-x---
2025-08-26 09:47:24
x86_64-redhat-linux-g++
1.21 MB
-rwxr-x---
2025-08-26 09:47:24
x86_64-redhat-linux-gcc
1.21 MB
-rwxr-x---
2025-08-26 09:47:26
x86_64-redhat-linux-gcc-8
1.21 MB
-rwxr-x---
2025-08-26 09:47:26
xargs
application/x-sharedlib
74.11 KB
-rwxr-xr-x
2025-12-18 02:57:01
xmlcatalog
application/x-sharedlib
20.38 KB
-rwxr-xr-x
2026-07-08 03:05:30
xmllint
application/x-sharedlib
73.38 KB
-rwxr-xr-x
2026-07-08 03:05:30
xmlwf
application/x-sharedlib
36.97 KB
-rwxr-xr-x
2026-06-03 11:35:13
xsltproc
application/x-sharedlib
28.47 KB
-rwxr-xr-x
2026-06-16 04:39:24
xsubpp
text/x-perl
4.96 KB
-rwxr-xr-x
2019-10-13 08:58:35
xxd
application/x-sharedlib
20.54 KB
-rwxr-xr-x
2026-07-13 08:08:02
yes
application/x-sharedlib
33.37 KB
-rwxr-xr-x
2026-03-24 01:05:31
zcat
text/x-shellscript
1.94 KB
-rwxr-xr-x
2022-04-27 05:49:28
zcmp
text/x-shellscript
1.64 KB
-rwxr-xr-x
2022-04-27 05:49:28
zdiff
text/x-shellscript
5.74 KB
-rwxr-xr-x
2022-04-27 05:49:28
zegrep
text/x-shellscript
29 B
-rwxr-xr-x
2022-04-27 05:49:28
zfgrep
text/x-shellscript
29 B
-rwxr-xr-x
2022-04-27 05:49:28
zforce
text/x-shellscript
2.03 KB
-rwxr-xr-x
2022-04-27 05:49:28
zgrep
text/x-shellscript
7.4 KB
-rwxr-xr-x
2022-04-27 05:49:28
zip
application/x-sharedlib
229 KB
-rwxr-xr-x
2019-10-11 01:11:04
zipcloak
application/x-sharedlib
102.91 KB
-rwxr-xr-x
2019-10-11 01:11:04
zipgrep
text/x-shellscript
2.88 KB
-rwxr-xr-x
2008-10-10 05:40:36
zipinfo
application/x-sharedlib
201.88 KB
-rwxr-xr-x
2025-06-03 02:10:12
zipnote
application/x-sharedlib
97.76 KB
-rwxr-xr-x
2019-10-11 01:11:04
zipsplit
application/x-sharedlib
97.76 KB
-rwxr-xr-x
2019-10-11 01:11:04
zless
text/x-shellscript
2.15 KB
-rwxr-xr-x
2022-04-27 05:49:28
zmore
text/x-shellscript
1.8 KB
-rwxr-xr-x
2022-04-27 05:49:28
znew
text/x-shellscript
4.45 KB
-rwxr-xr-x
2022-04-27 05:49:28
zsoelim
application/x-sharedlib
42.55 KB
-rwxr-xr-x
2019-10-13 02:29:41
~ ACUPOFTEA - baroun-eg.com